Default Device Columns

The default columns that are displayed in the Device List are described below. Use the column picker to customize the column display. The Device List offers horizontal scroll bars and the ability to resize a column (select and drag the right edge of the column). Your customized display is persistent. It is maintained after you navigate to another window, or log out and log in again.

By default, the table contains the following columns:

Status: The connection status of the device, indicated by icon colors. Hover over an icon to see what it identifies. For more information, see Device Status Icons.
Note
For switches, an icon indicates that the switch uses device-level configuration settings instead of the device template (network policy) configuration. Select this icon to revert to the device template configuration.
Host Name (sortable): The host name of the device. Select the host name to see an overlay window with detailed information and configuration options for this device.
Network Policy: The network policy assigned to this device. If you have not assigned a network policy, you can do so now. Select the check box for the device, and then select ACTIONS > Assign Network Policy.
Managed By: Whether the device is managed by ExtremeCloud IQ, ExtremeCloud IQ - Site Engine (Site Engine also manages third-party devices), or managed locally by ExtremeCloud IQ Controller. (When devices are managed locally, this column is empty.)
Uptime: The amount of time since the device last rebooted and re-connected.
MGT IP Address: The IP address of the device.
Clients: The number of clients connected to this device.
MAC: The MAC address of the device.
Location: The location of the device in your network. To assign or change the location, do one of the following:
- Select the location name, then select Actions > Assign Location. Or,
- Select the name in the Location column. In the dialog box, highlight the device, move it to the correct location and then select Assign.
Note
For devices managed by ExtremeCloud IQ - Site Engine the location is read-only. You can assign the location in ExtremeCloud IQ - Site Engine.
CoPilot: Identifies if the CoPilot license is used by ExtremeCloud IQ. Valid values are:
- None — This indicates one of the following conditions:
  - CoPilot is disabled
  - Device is not compatible
  - Device is unmanaged
  - Customer intentionally revoked CoPilot license.
- CoPilot Active — CoPilot is actively licensed
- Grace Period — CoPilot license has expired and the grace period applies
- Unlicensed — CoPilot license has expired
- Trial — Device is part of a trial VIQ
Serial #: The serial number of the device.
Feature License: Identifies the licensed features the device is using. Valid values are: None, MacSec, Premier.
Device License: Identifies the ExtremeCloud IQ license type that is used to manage the device. Valid values are:
- Pilot — ExtremeCloud IQ Pilot license
- Navigator — ExtremeCloud IQ Navigator license
- Legacy — Legacy entitlement key
- Not Required — Indicates that a Ping Only device is reported by ExtremeCloud IQ - Site Engine , APs reported by ExtremeCloud IQ Controller, Digital Twin (DT), Simulated, or Unmanaged by user
- Trial — Trial VIQ
Model: The hardware model of the device. The hardware model and serial number appear on a label on the underside of the chassis.
OS Version: The version that is currently running on the device.
Updated: The last time the configuration on this device was updated. If an update was not successful, displays a Device Update Failed error message that includes configuration, firmware, certificate, and signature update issues, reboot timeouts, and error information specific to devices configured using automatic provisioning. Hover over the error message to see details. To view error message descriptions listed by device and timestamp, select the error message link.
MGT VLAN: The management VLAN for this device.
MAKE: Extreme Networks: For example, Fabric Engine, Switch Engine, EXOS, VOSS, WiNG. External: For example CISCO.
MANAGED: Whether or not the device is currently managed.
COUNTRY: The device country location code.
OS: The operating system currently running on the device. For example, FABRIC, WiNG, CLOUD-IQ ENGINE, CISCO.

Other column options are as follows:

IoT0 Profile: The name of the profile assigned to the IoT0 wireless interface.
IQ Agent: For switches, the IQ Agent version. IQ Agent enables communication between switches and ExtremeCloud IQ.
WIFI0 Channel: The channel currently used by the WiFi0 radio. Refer to the data sheet for your device and your software-defined radio (SDR) configuration to determine the band on which the WiFi0 radio is operating.
WiFi1 Channel: The channel currently used by the WiFi1 radio. Refer to the data sheet for your device and your software-defined radio (SDR) configuration to determine the band on which the WiFi0 radio is operating.
WIFI1 Power: The power level of the WiFi1 radio.
WiFi2 Channel: The channel currently used by the WiFi2 radio. Refer to the data sheet for your device and your software-defined radio (SDR) configuration to determine the band on which the WiFi0 radio is operating.
WiFi2 Power: The power level of the WiFi2 radio.
WiFi0 Power: The power level of the WiFi0 radio.
NTP State: Shows whether NTP is enabled, disabled, or is not applicable.
Stack Unit: The unit number of a switch in a stack.
Stack Role: The role (primary, secondary, or member) of a switch in a stack.

For more information about ExtremeCloud IQ licensing, see the ExtremeCloud IQ Licensing Guide.