Configure Fabric Attach

Physically connect the device to a Fabric Connect-enabled switch. To perform the following task, you will need the device VLAN ID and I-SID number.

For more information about Fabric Attach, see Fabric Attach.

Use this task to configure a device connected to an existing Fabric Connect network.

  1. From within the network policy, navigate to the Device Template page and scroll down to the Wired Interfaces section.
  2. Select the add icon next to the Fabric Attach field.
  3. Enter the device's associated VLAN ID and select its I-SID# from the drop down.
  4. Select Save.
9037930-01 Rev AA