Spanning Switches with Port-Based VLANs
To create a port-based
VLAN (Virtual LAN) that spans two switches, you must do two things:
-
Assign the port on each switch to the
VLAN.
-
Cable the two switches together using one port on each
switch per VLAN.
Single Port-based VLAN Spanning Two Switches illustrates a single VLAN that spans a BlackDiamond switch and another Extreme Networks
switch. All ports on the System 1 switch belong to VLAN Sales. Ports 1 through 29 on the
system 2 switch also belong to VLAN Sales. The two switches are connected using slot 8,
port 4 on System 1 (the BlackDiamond switch), and port 29 on system 2 (the other
switch).
Single Port-based VLAN Spanning Two Switches
-
To create multiple VLANs that span two switches in a
port-based VLAN, a port on System 1 must be cabled to a port on System 2 for each VLAN you
want to have span across the switches.
At least one port on each switch must be a member
of the corresponding VLANs as well.
Two Port-based VLANs Spanning Two Switches illustrates two VLANs spanning two switches. On System 2, ports 25 through 29 are part
of VLAN Accounting; ports 21 through 24 and ports 30 through 32 are part of VLAN
Engineering. On System 1, all ports on slot 1 are part of VLAN Accounting; all ports on
slot 8 are part of VLAN Engineering.
Two Port-based VLANs Spanning Two Switches
VLAN Accounting spans System 1 and System 2
by way of a connection between System 2, port 29 and System 1, slot 1, port 6. VLAN
Engineering spans System 1 and System 2 by way of a connection between System 2, port 32,
and System 1, slot 8, port 6.
-
Using this configuration, you can create multiple
port-based VLANs that span multiple switches, in a daisy-chained fashion.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB