Showing Bridge Port Extender Information

Use the following show commands to display information about the VPEX setup.

To show the status of VPEX mode, and if applicable, switch port to bridge port extender (BPE) slot assignments, use the following command:
show vpex
To show status information about the BPE attached to the specified cascade ports, use the following command:
show vpex ports ports_list
To show BPE statistics control plane information on an individual per-cascade-port basis, use the following command:
show vpex ports {port_list} {statistics} {detail}
To show BPE Edge Control Protocol (ECP) counter information, use the following command:
show vpex ports {port_list} ecp statistics
To show attached BPE's cascade port, slot assignment number, and MAC addresses, use the following command:
show vpex bpe
To show power supply, temperature, and fan status for BPEs, use the following command:
show vpex bpe {slot slot_num} {environment}
To show general BPE control plane statistics, use the following command:
show vpex bpe {slot slot_num} {statistics} {detail}
To show CPU utilization information for BPEs, use the command:
show vpex bpe {slot slot_num} cpu-utilization
To show detailed image version information for BPEs, use the command:
show vpex bpe { slot slot_num} version detail
To show a BPE's name, use the following command:
show slot {slot {detail} | detail }
To show information about the Port Extension TLV, use the command:
show lldp {port [all | port_list]} neighbors {detailed}

Published March 2020prev | next