SA Request Processing

You can configure the router to accept or reject SA request messages from a specified MSDP (Multicast Source Discovery Protocol) peer or all peers. If an SA request filter is specified, only SA request messages from those groups permitted are accepted. All others are ignored.

Configure the router to accept SA request messages from a specified MSDP peer or all peers using the command:
enable msdp [{peer} remoteaddr | peer all] process-sa-request {sa-request-filter filter-name } {vr vr_name}
Configure the router to reject SA request messages from a specified MSDP peer or all peers using the command:
disable msdp [{peer} remoteaddr | peer all] process-sa-request {vr vrname}
Display configuration and run-time parameters about MSDP peers using the command:
show msdp [peer {detail} | {peer} remoteaddr] {vr vr_name}

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback