To add or remove IP/MAC addresses to or from the network-zone, enter the following command:
configure access-list network-zone zone_name [add | delete] [mac-address macaddress {macmask} | ipaddress [ipaddress {netmask} | ipNetmask | ipv6_address_mask]]Here is an example:
Switch# configure access-list network-zone zone1 add ipaddress 11.1.1.1/24
If you try to add the same IP/MAC with the same or narrow mask, the configuration is rejected, with the following error message:
Switch# configure access-list network-zone "zone1" add ipaddress 11.1.1.1/32 Error: Network Zone "zone1" - Zone already has the same entity value with same or wider mask.
If the you try to add more than eight attributes to a network-zone, the following error message is issued:
Switch# configure access-list network-zone "zone1" add ipaddress 11.1.1.1/24 Error: Network Zone "zone1" - Reached maximum number of attributes. Unable to add more.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB