Available Stacking Methods

Each ExtremeSwitching and Summit switch model can use various methods of stacking.

Summit Stacking by Stacking Method shows the switch models that can participate in each stacking method.

Click to expand in new window

Summit Stacking by Stacking Method

Stacking Method Speed per Link (HDX) Cable Type and Lengths Switch Models
SummitStack 10 Gbps 0.5 m, 1.5 m, 3.0 m, 5.0 m,

20Gb Stacking Cable

Summit X460-G2
SummitStack-V 10 Gbps 0.5 m - 40 km

SFP+, XENPAK (with SR, LR, and ER)

ExtremeSwitching X440-G2

Summit X450-G2 (10G models)

Summit X460-G2 (1G models with VIM-2x)

Summit X460-G2 (10G models)

ExtremeSwitching X620

Summit X670-G2

Summit X770 (ports 103,104)

SummitStackV80 20 Gbps

0.5 m - 100 m

QSFP+ only

Summit X670-G2-48x-4q (ports 57, 61)
SummitStack-V84 21 Gbps 0.5 m - 5 m

QSFP+ passive copper

Summit X450-G2 (rear panel 21G stacking ports)
SummitStack-V160 40 Gbps 0.5 m - 100 m

QSFP+ only

X460-G2 (VIM-2q)

Summit X670-G2-48x-4q (ports 57, 61)

Summit X770 (ports 103 and 104)

SummitStack-V320 80 Gbps 0.5 m - 100 m

QSFP+ only

Summit X670-G2-48x-4q (ports 49, 53, 57, 61)

Summit X770-32q (ports 101 and 103, and 102 and 104)

SummitStack-V400 106 Gbps 0.5 m - 100 m

QSFP28 only

ExtremeSwitching X590 (ports 29,33)

ExtremeSwitching X690 (ports 61,69)

ExtremeSwitching X870 (ports 121,125)

SummitStack-V400 Alternative Configuration 100 Gbps V400 Alternative Configuration is required when using specific fiber cables. This mode sets the stack ports to 100G, enables pre-emphasis, and FEC (clause_91).
  • QSFP28 SR4
  • QSFP28 LR4
  • QSFP28 CWDM4
  • QSFP28 PSM4
  • QxQ AOC cable - 5m
  • QxQ AOC cable - 7m
  • QxQ AOC cable - 10m
  • QxQ AOC cable - 20m

ExtremeSwitching X590 (ports 29,33)

ExtremeSwitching X690 (ports 61,69)

ExtremeSwitching X870 (ports 121,125)

For more details about the stacking methods that are available for each switch series, see the ExtremeSwitching and Summit Switches: Hardware Installation Guide for Switches Using ExtremeXOS 21.1 or Later.

Note

Note

Because all switches in the stack must run the same version of ExtremeXOS, it is not possible to stack switches that require ExtremeXOS version 21, for example the X440-G2 and the X620, with switches that are incompatible with ExtremeXOS version 21, for example the X440 and the X460.