Routing Configuration Example

Unicast Routing Configuration Example illustrates a switch with three VLANs defined as follows:

Finance
- All ports on slots 1 and 3 have been assigned.
- IP address 192.207.35.1.
Personnel
- Protocol-sensitive VLAN (Virtual LAN) using the IP protocol.
- All ports on slots 2 and 4 have been assigned.
- IP address 192.207.36.1.
MyCompany
- Port-based VLAN.
- All ports on slots 1 through 4 have been assigned.

Unicast Routing Configuration Example

The stations connected to the system generate a combination of IP traffic and NetBIOS traffic. The IP traffic is filtered by the protocol-sensitive VLANs. All other traffic is directed to the VLAN MyCompany.

In this configuration, all IP traffic from stations connected to slots 1 and 3 have access to the router by way of the VLAN Finance. Ports on slots 2 and 4 reach the router by way of the VLAN Personnel. All other traffic (NetBIOS) is part of the VLAN MyCompany.

The example in the above figure is configured as follows:

create vlan Finance tag 10
create vlan Personnel tag 11
create vlan MyCompany

configure Finance protocol ip
configure Personnel protocol ip

configure Finance add port 1:*,3:* tag
configure Personnel add port 2:*,4:* tag
configure MyCompany add port all

configure Finance ipaddress 192.207.35.1
configure Personnel ipaddress 192.207.36.1
configure rip add vlan Finance
configure rip add vlan Personnel

enable ipforwarding
enable rip

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback