Unfortunately, some MPLS (Multiprotocol Label Switching) implementations do not support the ability to forward packets received on an egress LSP to their OSPF (Open Shortest Path First) router ID and/or BGP (Border Gateway Protocol) next hop address.
If your MPLS network includes equipment that does not support this type of IP forwarding, you can use configuration commands to explicitly control the use of calculated LSP next hops.
These commands enable and disable the calculation of LSP next hops by OSPF:
These commands enable and disable the calculation of LSP next hops by BGP:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB