Standards

Table 1. Safety Standards

North American Safety of ITE

CAN/CSA C22.2 NO. 60950-1-01, CAN/CSA C22.2 NO. 62368-1-14

CAN/CSA C22.2 NO. 60950-1-01, CAN/CSA C22.2 NO. 62368-1-14

UL 60950-1, UL 62368-1

European Safety of ITE

EN 60950-1

EN 62368-1

EN 60825-1 Class 1 (Lasers Safety)

2014/35/EU Low Voltage Directive

ETS 300 132-1 Equipment Requirements for AC Power Equipment Derived from DC Sources

ETS 300 132-2 Equipment Requirements for DC Powered Equipment ETS 300 253 Facility Requirements

ETS 300 253 Facility Requirements

International Safety of ITE

CB Report & Certificate per IEC 60950-1 + National Differences

CB Report & Certificate IEC 62368-1

AS/NZS 60950-1 (Australia /New Zealand)

CNS 14336-1 (Taiwan)

GB 4943.1 (China)

Table 2. EMI/EMC Standards

North America EMC for ITE

  • FCC 47 CFR part 15 Class A (USA)
  • ICES-003 Class A (Canada)

European EMC standards

  • EN 55032 Class A
  • EN 55011
  • EN 55035
  • EN 61000-3-2 (Harmonics)
  • EN 61000-3-3 (Flicker)
  • EN 300 386 (EMC Telecommunications)
  • 2014/30/EU EMC Directive

International EMC certifications

  • CISPER 32 Class A (International Emissions)
  • AS/NZS CISPER 32
  • CISPER 24 Class A (International Immunity)
  • IEC 61000-4-2/EN 61000-4-2 Electrostatic Discharge, 8kV Contact, 16kV Air, Criteria B
  • IEC 61000-4-3/EN 61000-4-3 Radiated Immunity 10V/m, Criteria B
  • IEC 61000-4-4/EN 61000 -4-4 Transient Burst, 2kV, Criteria B
  • IEC 61000-4-5/EN 61000-4-5 Surge, 1kV L-L, 2kV L-G, Level 3 Criteria B
  • IEC 61000-4-6/EN 61000-4-6 Conducted Immunity, 0.15-80 Mhz, 10Vrms, 80%AM (1kHz) Criteria A
  • IEC/EN 61000-4-11 Power Dips & Interruptions, >30%, 25 periods, Criteria C
  • CNS 13438 (Taiwan)
  • GB/T9254-2008 (China)

Country-specific

  • VCCI Class A (Japan Emissions)
  • ACMA RCM (Australia Emissions)
  • CQC Mark (China)
  • KCC Mark, EMC Approval (Korea)
  • BSMI (Taiwan)
  • ANATEL (Brazil)
  • NoM (Mexico)
  • EAC mark (Russia, Belarus, Kazakhstan, Armenia, Kyrgyzstan)
  • NRCS (South Africa)
  • TEC mark (India)
Table 3. Telecom Standards

EN/ETSI 300 386:2008 (EMC Telecommunications)

EN/ETSI 300 019 (Environmental for Telecommunications)

MEF9 and MEF14 certified for EPL, EVPL, and ELAN

Table 4. IEEE Media Access Standards

802.3-2005 CSMA/CD Access Method and Physical Layer Specifications

802.3ab 1000BASE-T

802.3ae 10 Gigabit Ethernet

802.3u 100BASE-TX, 100BASE-T4, 100BASE-FX Fast Ethernet at 100Mbps with Auto-Negotiation

802.3x Flow Control

802.3z 1000BASE-X Gigabit Ethernet over fiber optic at 1 Gbps

802.3ad Link Aggregation

802.1q Virtual Bridged LANs

802.1d MAC Bridges

802.1w Rapid STP

802.1s Multiple Spanning Trees

802.1ag Connectivity Fault Management(CFM)

802.3.bj 100 Gigabit Ethernet

802.1ab Link Layer Discovery Protocol

802.1x Port-Based Network Access Control

802.3ah Ethernet in the First Mile Link OAM3

ITU-T G.8013/Y.1731 OAM mechanisms for Ethernet

G.8032