Displaying VLAN information

Do the following to display information about a specific VLAN.

Procedure

  1. Enter the show vlan to display information about VLAN 1.
    device# show vlan 1
    VLAN Name State Ports
    (u)-Untagged, (t)-Tagged
    (c)-Converged
    ============================================================
    1 default ACTIVE Eth 0/1(t) Eth 0/4(t) Eth 0/5(t) Eth 0/8(t) 
    
  2. Enter the show vlan detail command to display detailed information.
    device# show vlan det
    VLAN: 1, Name: default
    Admin state: ACTIVE, Config status: Static
    Number of interfaces: 7
          Eth 0/4, tagged, Static
          Eth 0/3, tagged, Static
          Eth 0/2, tagged, Static
          Eth 0/8, tagged, Static
          Eth 0/6, tagged, Static
          Eth 0/9, untagged, Static
          Po 20, tagged, Static
    VLAN: 10, Name: VLAN0010
    Admin state: ACTIVE, Config status: Static
    Number of interfaces: 3
          Eth 0/3, tagged, Static
          Eth 0/2, tagged, Static
          Eth 0/4, tagged, Static
          Po 20, tagged, Static
    VLAN: 11, Name: VLAN0011
    Admin state: ACTIVE, Config status: Static
    Number of interfaces: 3
          Eth 0/3, tagged, Static
          Eth 0/2, tagged, Static
          Eth 0/4, tagged, Dynamic (MVRP)
    VLAN: 12, Name: VLAN0012
    Admin state: ACTIVE, Config status: Dynamic (MVRP)
    Number of interfaces: 1
          Eth 0/4, tagged, Dynamic (MVRP)
    VLAN: 13, Name: VLAN0013
    Admin state: ACTIVE, Config status: Dynamic (EP tracking)
    Number of interfaces: 1
          Eth 0/6, tagged, Dynamic (EP tracking)
    VLAN: 14, Name: VLAN0014
    Admin state: INACTIVE(member port down), Config status: Static
    Number of interfaces: 1
          Eth 0/8, tagged, Static