-
In privileged EXEC mode, enter
configure
terminal.
device# configure terminal
-
Enter the telemetry profile
command to configure the profile.
device(config)# telemetry profile interface default_interface_statistics
-
(For interface profile-type) Enter the
interface command, specifying the interface range to
monitor.
device(config-interface-default_interface_statistics)# interface 0/1-2,0/7
-
(For other profiles that require
specifying interfaces) Enter the interface-range command,
specifying the interface range to monitor.
device(config-queue-default_queue_statistics)# interface-range 0/1-2,0/7
-
To modify the default interval,
enter the interval command.
device(config-interface-default_interface_statistics)# interval 30
-
To remove a default attribute,
enter the no
add command.
device(config-system-utilization-default_system_utilization_statistics)# no add buffers
-
To restore a default attribute that was previously removed, enter the
add command.
device(config-system-utilization-default_system_utilization_statistics)# add buffers
-
To restore all default attributes, enter the
telemetry reset
profile command.
device(config-system-utilization-default_system_utilization_statistics)# do telemetry reset profile interface-profile
-
To specify a VRF other than the
default mgmt-vrf, enter the use-vrf command.
device(config-interface-default_interface_statistics)# use-vrf blue_vrf
-
To exit configuration
mode—saving the configuration—enter exit.
device(config-interface-default_interface_statistics)# exit
The following example specifies the monitored
interfaces and changes the default interval.
device# configure terminal
device(config)# telemetry profile interface default_interface_statistics
device(config-interface-default_interface_statistics)# interval 30
device(config-interface-default_interface_statistics)# interface 0/1-2,0/7
device(config-interface-default_interface_statistics)# exit
