Associating a test profile to an RMEP for scheduled Two-Way ETH-SLM or Two-Way Eth-DM

Enter the global configuration mode.
```
device# configure terminal
```
Use the protocol cfm command to enter the CFM protocol configuration mode.
```
device(config)# protocol cfm
```
Use the domain-name command to configure a maintenance domain.
```
device(config-cfm)# domain-name m11 id 1 level 4
```
Use the ma-name command to configure the maintenance association (MA).
```
device(config-cfm-md-md1)# ma-name ma1 id 1 vlan-id 30 priority 3
```
Use the mep command to configure the maintenance end point (MEP).
```
device(config-cfm-md-ma-ma1)# mep 1 down Ethernet 0/2 
```

Use the remote-mep command to configure a remote MEP and associate a test profile.

device(config-cfm-md-ma-mep-1)# remote-mep 2 test-profile my_test_profile mode initiator