Configuring the gRPC telemetry server

1. In privileged EXEC mode, enter configure terminal.
   

   device# configure terminal

2. Enter telemetry server, with the option of specifying a VRF other than the default mgmt-vrf.
   • (Default) mgmt-vrf
     

     device(config)# telemetry server

   • Other VRF
     

     device(config)# telemetry server use-vrf blue_vrf

3. To specify a port other than the default 50051, enter the port command.
   

   device(config-server-mgmt-vrf)# port 50000

4. Enter activate.
   

   device(config-server-mgmt-vrf)# activate

5. Verify the telemetry server status with the do show telemetry server status command. The active sessions displayed are initiated by gRPC clients with associated telemetry profiles.
   

   device(config-server-mgmt-vrf)# do show telemetry server status
   
   Telemetry Server running on port 50051, with VRF mgmt-vrf and transport as tcp.
   
   Active Sessions:
   ----------------
   Client            Profiles Streamed                      Interval   Uptime      Last Streamed
   ------            -------------------                    ---------  ----------  ---------------
   ClientIP1/Host1   default_interface_statistics           120 sec    05/10:23    2017-01-15: :05:07:33
                     default_system_utilization_statistics  300 sec    05/10:23    2017-01-15: :05:07:33
   
   ClientIP2/Host2   default_system_utilization_statistics  300 sec    05/10:23    2017-01-15: :05:07:33
   

6. Verify the telemetry server configuration with the do show running-configuration telemetry server command.
   

   device(config-server-mgmt-vrf)# do show running-configuration telemetry server
   
   telemetry server
     transport tcp
     port 50051
     activate
   ! 
   

The following is a complete telemetry server configuration example.

device# configure terminal
device(config)# telemetry server
device(config-server-mgmt-vrf)# activate
device(config-server-mgmt-vrf)# do show telemetry server status

Telemetry Server running on port 50051, with VRF mgmt-vrf and transport as tcp.

Active Sessions:
----------------
Client            Profiles Streamed                      Interval   Uptime      Last Streamed
------            -------------------                    ---------  ----------  ---------------
ClientIP1/Host1   default_interface_statistics           120 sec    05/10:23    2017-01-15: :05:07:33
                  default_system_utilization_statistics  300 sec    05/10:23    2017-01-15: :05:07:33

ClientIP2/Host2   default_system_utilization_statistics  300 sec    05/10:23    2017-01-15: :05:07:33
device(config-server-mgmt-vrf)# do how running-configuration telemetry server

telemetry server
  transport tcp
  port 50051
  activate
!