get-interface-detail
  
  
     Usage
      
      
      
      
      
      
      
      
      
      
      
      
      
<?xml version="1.0" ?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
      <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>
]]>]]>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="95d5b8a8-dcb8-4e14-b35c-d3bb9e1e9f4a">
  <get-interface-detail xmlns="urn:brocade.com:mgmt:brocade-interface-ext"/>
</rpc>]]>]]>
<?xml version="1.0" encoding="UTF-8"?>
  <rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="95d5b8a8-dcb8-4e14-b35c-d3bb9e1e9f4a">
  <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
    <interface-type>port-channel</interface-type>
      <interface-name>9</interface-name>
      <port-mode>l3</port-mode>
      <if-name>Port-channel 9</if-name>
      <if-state>down</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (admin down)</line-protocol-state-info>
      <hardware-type>aggregate</hardware-type>
      <current-hardware-address>00:00:00:00:00:00</current-hardware-address>
      <logical-hardware-address>00:00:00:00:00:00</logical-hardware-address>
      <ifindex>671088649</ifindex>
      <mtu>9216</mtu>
      <ip-mtu>1500</ip-mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>10Gbps</configured-line-speed>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
  </interface>
  <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/1</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/1</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0c</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0c</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201334784</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-auto-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
  </interface>
  <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/2</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/2</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0d</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0d</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201342976</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
    </interface>
    <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/3</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/3</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0e</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0e</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201351168</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
    </interface>
    <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/4</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/4</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0f</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0f</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201359360</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
    </interface>
    <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/5</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/5</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:10</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:10</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201367552</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
    </interface>
    <-- Other interfaces -->
    <interface-name>0/54</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/54</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:41</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:41</logical-hardware-address>
      <ifindex>201769216</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>100Gbps</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
    </interface>
    <has-more xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>false</has-more>
</rpc-reply>]]>]]>
    
     Parameters
      
      
        
          - interface-type
          
 
          - Specifies the interface type. 
 
        
        
          - interface-name
          
 
          - Specifies the nterface name. 
 
        
        
          - port-role
          
 
          - Displays the current role that the
            particular interface is playing. This is applicable only for physical interfaces. 
 
        
        
          - port-mode
          
 
          - Displays the operational mode of the
            particular interface. This is applicable only for physical interfaces or port-channel
            interfaces. 
 
        
        
          - if-name
          
 
          - Displays the interface display name as
            in MIB-II's ifTable. However interface-name and interface-type values of this instance
            forms fully qualified name for this interface. 
 
        
        
          - if-state
          
 
          - Displays the current operational state
            of this interface. 
 
        
        
          - line-protocol-state
          
 
          - Displays the 'Line protocol' state of
            the interface. 
 
        
        
          - line-protocol-state-info
          
 
          - Displays thwe reason for the current
            line protocol state of the interface. 
 
        
        
          - hardware-type
          
 
          - Dispalys the hardware type 
 
        
        
          - current-hardware-address
          
 
          - Displays the address of the interface
            at its protocol sub-layer. 
 
        
        
          - logical-hardware-address
          
 
          - Displays the address of the interface
            at its protocol sub-layer. 
 
        
        
          - ifindex
          
 
          - Displays a unique value, greater than
            zero, for each interface. 
 
        
        
          - mtu
          
 
          - Displays the IP MTU value of the
            interface. 
 
        
        
          - actual-line-speed
          
 
          - Displays the actual line speed of this
            interface. 
 
        
        
          - configured-line-speed
          
 
          - Displays the administratively
            configured line speed of the interface. 
 
        
        
          - line-duplex-state
          
 
          - Displays the 'Line duplex state' of the
            interface. 
 
        
        
          - flow-control
          
 
          - Displays the 'Flow control' for the
            interface. 
 
        
        
          - queuing-strategy
          
 
          - Displays the 'Queuing strategy' for the
            interface. 
 
        
        
          - ifHCInOctets
          
 
          - Displays the total number of octets
            received on the interface, including framing characters. 
 
        
        
          - ifHCInUcastPkts
          
 
          - Displays the The number of packets,
            delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a
            multicast or broadcast address at this sub-layer. 
 
        
        
          - ifHCInMulticastPkts
          
 
          - Displays The number of packets,
            delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast
            address at the sub-layer. For a MAC layer protocol, this includes both Group and
            Functional addresses. 
 
        
        
          - ifHCInBroadcastPkts
          
 
          - Displays the The number of packets,
            delivered by the sub-layer to a higher (sub-)layer, which were addressed to a broadcast
            address at the sub-layer. 
 
        
        
          - ifHCInErrors
          
 
          - For packet-oriented interfaces, the
            number of inbound packets that contained errors preventing them from being deliverable
            to a higher-layer protocol. For character-oriented or fixed-length interfaces, the
            number of inbound transmission units that contained errors preventing them from being
            deliverable to a higher-layer protocol. 
 
        
        
          - ifHCOutOctets
          
 
          - Displays the total number of octets
            transmitted out of the interface, including framing characters 
 
        
        
          - ifHCOutUcastPkts
          
 
          - Displays the total number of packets
            that higher-level protocols requested be transmitted, and which were not addressed to a
            multicast or broadcast address at the sub-layer, including those that were discarded or
            not sent. 
 
        
        
          - ifHCOutMulticastPkts
          
 
          - Dispalys the total number of packets
            that higher-level protocols requested be transmitted, and which were addressed to a
            multicast address at this sub-layer, including those that were discarded or not sent.
            For a MAC layer protocol, this includes both Group and Functional addresses. 
 
        
        
          - ifHCOutBroadcastPkts
          
 
          - Displays the total number of packets
            that higher-level protocols requested be transmitted, and which were addressed to a
            broadcast address at this sub-layer, including those that were discarded or not sent.
          
 
        
        
          - ifHCOutErrors
          
 
          - For packet-oriented interfaces, the
            number of outbound packets that could not be transmitted because of errors. For
            character-oriented or fixed-length interfaces, the number of outbound transmission units
            that could not be transmitted because of errors. 
 
        
        
          - ip-mtu
          
 
          - Displays the IP MTU value of this
            interface. 
 
        
        
          - line-protocol-exception-info
          
 
          - Displays the 'Exception information' of
            line protocol. 
 
        
        
          - media-type
          
 
          - Displays the media type. 
 
        
        
          - wavelength
          
 
          - Displays the wavelength of pluggable
            media. 
 
        
        
          - if-description
          
 
          - Displays the textual string containing
            information about the interface. 
 
        
        
          - queuing-strategy
          
 
          - Displays the 'Queuing strategy' for
            this interface.