ipv6/access-list/standard/{acl-name}/seq

Usage

<ipv6-acl xmlns="urn:brocade.com:mgmt:brocade-ipv6-access-list">
	<ipv6>
		<access-list>
			<standard>
				<name>acl24</name>
				<seq>
					<seq-id>24</seq-id>
					<action>permit</action>
					<src-host-any-sip>any</src-host-any-sip>
					<count></count>
					<log></log>
				</seq>
			</standard>
		</access-list>
	</ipv6>
</ipv6-acl>

Parameters

name

Specifies the access list name.

seq-id

Specifies the sequence number for the rule.

action

Specifies the action to be performed. The following actions can be performed.

deny

Drops traffic.

hard-drop

Forces to drop traffic.

permit

Allows traffic.

src-host-any-sip

Specifies any source host IP address.

count

Enables the counting of the packets matching the rule.

log

Packets matching the filter are sent to the CPU and a corresponding log entry is generated by enabling the logging mechanism. This parameter is only available with permit and deny.