ipv6/access-list/extended/{acl-name}/seq

Usage

<ipv6-acl xmlns="urn:brocade.com:mgmt:brocade-ipv6-access-list">
	<ipv6>
		<access-list>
			<extended>
				<name>acl14</name>
				<seq>
					<seq-id>14</seq-id>
					<action>deny</action>
					<protocol-type>ipv6</protocol-type>
					<src-host-any-sip>any</src-host-any-sip>
					<dst-host-any-dip>host</dst-host-any-dip>
					<dst-host-ip>2004:384d::24:23</dst-host-ip>
					<vlan>1</vlan>
					<count></count>
					<log></log>
				</seq>
			</extended>
		</access-list>
	</ipv6>
</ipv6-acl>

Parameters

name

Specifies the access list name.

seq-id

Specifies the sequence number for the rule.

action

Specifies the action to be performed. The following actions can be performed.

deny

Drops traffic.

hard-drop

Forces to drop traffic.

permit

Allows traffic.

protocol-type

Specifies the type of protocol used.

src-host-any-sip

Specifies any source host IP address.

dst-host-any-dip

Specifies any destination host IP address.

dst-host-ip

Specifies the destination host IP address.

vlan

VLAN interface number

count

Enables the counting of the packets matching the rule.

log

Packets matching the filter are sent to the CPU and a corresponding log entry is generated by enabling the logging mechanism. This parameter is only available with permit and deny.