interface/{interface-type}/{interface-name}/storm-control/ingress

Usage

<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
	<ethernet>
		<name>1/5</name>
		<storm-control xmlns="urn:brocade.com:mgmt:brocade-bum-storm-control">
			<ingress>
				<protocol-type>broadcast</protocol-type>
				<rate-format>limit-bps</rate-format>
				<rate-bps>100</rate-bps>
				<rate-percent>458632240</rate-percent>
				<bum-action>monitor</bum-action>
			</ingress>
		</storm-control>
	</ethernet>
</interface>

Parameters

name

Specifies the interface name

protocol-type

Specifies the protocol type

broadcast

Specifies that the command will operate on broadcast traffic only

unknown-unicast

Specifies that the command will operate on unknown-unicast traffic only

multicast

Specifies that the command will operate on multicast traffic only

rate-format

Specfies the rate format

limit-bps

Specifies that the value given to the rate parameter is in bits per second

limit-percent

Specifies that the value given to the rate parameter is in percentage of capacity of the interface

rate-bps

Specifies the amount of traffic allowed, either in bits per second or a percentage of the capacity of the interface, depending on which parameter was chosen with the rate

monitor

Specifies that, if a rate limit is reached within a five-second sampling period, a log message gets sent

shutdown

Specifies that, if a rate limit is exceeded within a five-second sampling period, the interface will be shut down