The AP3917i/e does not come with any mounting bracket. Hence, they need to be purchased separately. Refer the table below for information on mounting brackets used with the access point and it's specifications.
| Mounting Bracket/Accessory | Wall Install | Pole Install | Notes |
|---|---|---|---|
| WS-MBO-H01 (#30519); Bracket; Also known as the "H" mounting bracket | Yes | No | For installing the AP on a masonry wall, use a 5/16” diameter bit. For other materials, use the appropriate bit for the screws being used. |
| WS-MBO-POLE01 (#30520); Bracket; Also known as the Pole mounting bracket | No | Yes | If the pole diameter is <= 1" (25.4mm), use small cable clamp. If the pole diameter is between 5" - 7" (178mm), use large cable clamp. For any other pole diameter, provide your own stainless steel cable clamp. The band must be ½" (12.7mm) wide. |
| WS-MBO-ART01 (# 30514); 10" 2-Axis extension arm | Yes | Yes | The extension arm is used along with the H01 and POLE01 brackets for wall install and pole install respectively. The wall must be strong enough to support the AP during inclement weather. |
| KT-147407-01; Bracket; comes with three parts | Yes | Yes | For attaching to a wall or a flat surface, use the bracket part that has two holes on the surface of the metal portion. For attaching to a pole, if the 1-axis tilt is not required, attach the pole part of the bracket to the access point. If 1-axis tilt is required, attach the pole part of the KT-147407-01 bracket on top of the second wall part. |
| KT-150173-01; Bracket; used with KT-147407-01 bracket parts | Yes; use the flat wall mount part of KT-147407-01 bracket | Yes; use the pole bracket part of the KT-147407-01 bracket | The KT-150173-01 extension arm can also be used by itself without the other KT-147407-01 bracket parts. |