Attach the external antenna
cables to the Standard Polarity Type-N connectors on the AP3917e. All the antennas can be extended away from the AP using the optional
cables.
Note
Optional:To protect your Type-N, Male-Female external antennas from
lightning, use lightning protector ML-2452-LAK1-02R.
Place a terminator cap on any antenna connectors that will not be used.
When installing the AP, all
antennas must be positioned vertically. If the AP is vertical, do not install
the AP with the glands pointing upward. If the AP is horizontal, the recommended
installation is with the glands located be closest to the ground. In both cases,
we recommend that the antennas be extended vertically.
