LDAP Alerts

Use the information in the following tables to learn about all possible LDAP alerts in detail that are raised by Fault Management.

LDAP Connectivity Failure

31030 LDAP Connectivity Failure
Description Send an alert when LDAP server in XCO is not reachable
Preconditions

The polling is enabled only if:

  1. LDAP servers are configured in the system.
  2. Authentication fallback preference is set to LDAP.
  • System monitors all the LDAP servers.
  • Polling frequency is hourly.
  • During polling, login is performed with the base user configured in the system.
Requirements Alert shows the following data:
  • Server
  • Name
  • Error
The following example shows an alert when an LDAP server is not reachable:
<114>1 2003-10-11T22:14:15.003Z xco.machine.com FaultManager - -    
   [meta sequenceId=”47”]  
   [origin ip=”10.20.30.40” enterpriseId=”1916” software=”XCO” swVersion=”3.3.0”]  
   [alert@1916  
   resource=”/App/System/Security/Authentication?server=10.1.2.3” 
   alertId=”31030”  	  
   cause=”underlyingResourceUnavailable”  
   type=”communicationsAlarm”  
   severity=”major”]   
   [alertData@1916  
   server=”10.1.2.3”  
   name=”ldap1”
   error=”failed to connect to the LDAP server with the given credentials”] 
   BOMLDAP connectivity check failed for the server ‘10.x.x.x‘ configured with the name ‘ldap1‘ due to ‘failed to connect to the LDAP server with the given credentials.
Health Response
Response
{
    Resource: /App/System/Security/Authentication?server=10.1.2.3
    HQI {
        Color: Red
        Value: 3
    }
    StatusText: LDAP connectivity check failed for the server ‘10.1.2.3‘ configured with the name ‘ldap1‘ due to ‘failed to connect to the LDAP server with the given credentials. 
}

LDAP Server Connectivity Success

31031 LDAP Server Connectivity Success
Description Send an alert when LDAP server configured in XCO is reachable.
Preconditions

The polling is enabled only if:

  1. LDAP servers are configured in the system.
  2. Authentication fallback preference is set to LDAP.
  • System monitors all the LDAP servers.
  • Polling frequency is hourly.
  • During polling, login is performed with the base user configured in the system.
Requirements Alert shows the following data:
  • Server
  • Name
The following example shows an alert when an LDAP server is reachable:
<118>1 2003-10-11T22:14:15.003Z xco.machine.com FaultManager - -    
   [meta sequenceId=”47”]  
   [origin ip=”10.20.30.40” enterpriseId=”1916” software=”XCO” swVersion=”3.3.0”]  
   [alert@1916  
   resource=”/App/System/Security/Authentication?server=10.1.2.3” 
   alertId=”31031”  	  
   cause=”connectionEstablished”  
   type=”communicationsAlarm”  
   severity=”info”]   
   [alertData@1916
   server=”10.1.2.3” 
   name=”ldap1”] 
   BOMLDAP connectivity check success for the server ‘10.1.2.3‘ configured with the name ‘ldap1‘.
Health Response
Response
{
    Resource: /App/System/Security/Authentication?server=10.1.2.3
    HQI {
        Color: Green
        Value: 0
    }
    StatusText: LDAP connectivity check success for the server ‘10.1.2.3‘ configured with the name ‘ldap1‘. 
}

LDAP Server Configuration Removed

31032 LDAP Server Configuration Removed
Description Send an alert when LDAP server configuration is removed
Preconditions

The polling is enabled only if:

  1. LDAP servers are configured in the system.
  2. Authentication fallback preference is set to LDAP.
  • System monitors all the LDAP servers.
  • Polling frequency is hourly.
  • During polling, login is performed with the base user configured in the system.
Requirements Alert shows the following data:
  • Server
  • Name
The following example shows an alert when an LDAP server is removed:
<118>1 2003-10-11T22:14:15.003Z xco.machine.com FaultManager - -    
   [meta sequenceId=”47”]  
   [origin ip=”10.20.30.40” enterpriseId=”1916” software=”XCO” swVersion=”3.3.0”]  
   [alert@1916  
   resource=”/App/System/Security/Authentication?server=10.1.2.3” 
   alertId=”31032”  	  
   cause=”configRemoved”  
   type=”communicationsAlarm”  
   severity=”info”]   
   [alertData@1916
   server=”10.1.2.3” 
   name=”ldap1”] 
   BOMLDAP ‘ldap1‘ with server ip ‘10.1.2.3‘ removed
Health Response
Response
{
    Resource: /App/System/Security/Authentication?server=10.1.2.3
    HQI {
        Color: Green
        Value: 0
    }
    StatusText: LDAP ‘ldap1‘ with server ip ‘10.1.2.3‘ removed. 
}
9037858-01 RevAA