Configure Route Map Attribute

You can configure the route map attribute to enable external connectivity.

About this task

Follow this procedure to configure the route map attribute when you create or update a BGP peer.
Note

Note

For information about commands and supported parameters to configure route map attribute, see ExtremeCloud Orchestrator Command Reference, 3.3.1 .

Procedure

  1. Run the following command to configure route map when you create BGP peer: 
    efa tenant service bgp peer create --name <bgp-peer-name> --tenant <tenant-name>
    --ipv4-uc-nbr <device-ip,vrf-name:neighbor-ip,remote-asn>
    --ipv4-uc-nbr-bfd <switch-ip,vrf-name:ipv4-neighbor,bfd-enable(t/f),bfd-interval,bfd-rx,bfdmult> 
    --ipv4-uc-nbr-route-map <device-ip,vrf-name:neighbor-ip,route-mapname,direction(in/out)>
  2. Run the following command to configure route map when you update BGP peer: 
    efa tenant service bgp peer update --name <bgp-peer-name> --tenant <tenant-name>
    --operation peer-add
    --ipv4-uc-nbr <device-ip,vrf-name:neighbor-ip,remote-asn>
    --ipv4-uc-nbr-bfd <switch-ip,vrf-name:ipv4-neighbor,bfd-enable(t/f),bfd-interval,bfd-rx,bfdmult> 
    --ipv4-uc-nbr-route-map <device-ip,vrf-name:neighbor-ip,route-mapname,direction(in/out)>

    The following example configures route map attributes:

    efa tenant service bgp peer update --name ten1bgppeer1 --tenant ten1 
    --operation peer-add 
    --ipv4-uc-nbr 10.20.246.15,ten1vrf1:10.20.30.50,50000 
    --ipv4-uc-nbr-bfd 10.20.246.15,ten1vrf1:10.20.30.50,true 
    --ipv4-uc-nbr-route-map 10.20.246.15,ten1vrf1:10.20.30.50,rmap2,in 
    --ipv4-uc-nbr 10.20.246.16,ten1vrf1:10.20.30.50,50000 
    --ipv4-uc-nbr-bfd 10.20.246.16,ten1vrf1:10.20.30.50,true 
    --ipv4-uc-nbr-route-map 10.20.246.16,ten1vrf1:10.20.30.50,rmap2,out
    efa tenant service bgp peer show --detail
======================================================================

Name             : ten1bgppeer1
Tenant           : ten1
State            : bgp-peer-created
Description      :

Static Peer
-----------
        Device IP                   : 10.20.246.15
        VRF                         : ten1vrf1
        AFI                         : ipv4
        SAFI                        : unicast
        Remote IP                   : 10.20.30.50
        Remote ASN                  : 50000
        Next Hop Self               : false
        Update Source IP            :
        BFD Enabled                 : true
        BFD Interval                : 0
        BFD Rx                      : 0
        BFD Multiplier              : 0
        MD5 Password                : $9$MCgKGaNt6OASX68/7TC6Lw==
        Remove Private AS           : false
        Default Originate           : false
        Default Originate Route Map :
        Prefix List In              :
        Prefix List Out             :
        Route Map In                : rmap2
        Route Map Out               : rmap1
        Dev State                   : provisioned
        App State                   : cfg-in-sync

        Device IP                   : 10.20.246.16
        VRF                         : ten1vrf1
        AFI                         : ipv4
        SAFI                        : unicast
        Remote IP                   : fd40:4040:4040:1::fe
        Remote ASN                  : 50000
        Next Hop Self               : false
        Update Source IP            :
        BFD Enabled                 : true
        BFD Interval                : 0
        BFD Rx                      : 0
        BFD Multiplier              : 0
        MD5 Password                : $9$MCgKGaNt6OASX68/7TC6Lw==
        Remove Private AS           : false
        Default Originate           : false
        Default Originate Route Map :
        Prefix List In              :
        Prefix List Out             :
        Route Map In                : rmap1
        Route Map Out               : rmap2
        Dev State                   : provisioned
        App State                   : cfg-in-sync


Dynamic Peer
-----------
        0 Records
====================================================================
  3. Verify the switch configuration on the SLX device. 
    Rack1-Device1# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor 10.20.20.4 remote-as 4200000000
 neighbor 10.20.20.4 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.123/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 route-map in rmap1
  neighbor 10.20.30.40 bfd
  neighbor 10.20.30.50 remote-as 50000
  neighbor 10.20.30.50 route-map in rmap2
  neighbor 10.20.30.50 bfd
  maximum-paths 8
 !
 address-family ipv4 unicast
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!
    		 
    Rack1-Device2# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor 10.20.20.5 remote-as 4200000000
 neighbor 10.20.20.5 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.176/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 route-map out rmap1
  neighbor 10.20.30.40 bfd
  neighbor 10.20.30.50 remote-as 50000
  neighbor 10.20.30.50 route-map out rmap2
  neighbor 10.20.30.50 bfd
  maximum-paths 8
 !
 address-family ipv4 unicast
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!
9037858-01 RevAA