Assigning tagged and untagged ports to a VLAN is simple and quick with Chalet.
- To begin, select , and then click the
next to the VLAN you wish
to assign ports to.The General tab displays.
- Select the Assign Ports tab, and then select the Edit checkbox. This stops the
refresh timer so the switch will not update during this configuration.
The Available Ports list and
buttons become active.
- Select the check boxes next to the ports you wish
to assign, and then click Add
Tagged or Add
Untagged
The ports move to the
"Assigned Ports" area on the right.
- To remove ports from the VLAN, select the ports
from the Assigned Ports area and then click Remove.
- When finished, clear the Edit checkbox to restart the
refresh timer.
- Click Save
Config to save your changes.
- To confirm that your changes have been made to the
switch, click
.You are directed to the
Port Details page.
- Click the VLAN tab to see that the Member VLANs field
has been updated.
To enable DHCP on the
assigned ports, refer to Enabling DHCP.
