Complete the IP Address, User Name, and Password
fields for Peer 2, as the information for Peer 1 will be automatically populated
with the administrator account you used to access Chalet.
Click Login.
After logging in, Chalet sends the following commands to the switch to
help prevent loops that may occur in the default VLAN during device discovery:
configure stpd s0 mode dot1w
enable stpd s0
enable edp port all
Note
EDP is enabled
because it is needed for device discovery later in the
process.
Chalet performs a requriements check to ensure the peers are optimized for
MLAG.
