# efa tenant vrf create --name <vrf-name> --tenant <tenant-name> --ipv6static-route-bfd <destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier> --ipv4static-route-bfd < destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier>
# efa tenant vrf update –name <vrf-name> --tenant <tenant-name> --operation <static-route-bfd-add|static-route-bfd-delete> --ipv6-static-route-bfd <switch-ip, destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier> --ipv4static-route-bfd <switch-ip, destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier>
# efa tenant vrf create --name red --tenant tenant11 --ipv6-static-route-bfd 10.24.80.134,1001::2,1001::1,100,200,5 --ipv6-static-route-bfd 10.24.80.135,1011::2,1011::1,100,200,5 --ipv6-static-route-bfd 10.24.80.134,1002::2, 1002::1 --ipv6-static-route-bfd 10.24.80.135,1012::2, 1012::1 --ipv4-static-route-bfd 10.24.80.134,13.0.0.1,13.0.0.9,200,300,6 --ipv4-static-route-bfd 10.24.80.135,13.0.1.1,13.0.1.9,200,300,6 --ipv4-static-route-bfd 10.24.80.134,13.0.0.2,13.0.0.10 --ipv4-static-route-bfd 10.24.80.135,13.0.1.2,13.0.1.10 # efa tenant epg create --name ten1epg1 --tenant tenant1 --port 10.24.80.134[0/11],10.24.80.135[0/11] --switchport-mode trunk –ctag-range 11 --vrf red –anycast-ip 11:10.10.11.1/24
Switch Config
vrf vrf1 rd 172.31.254.13:1 evpn irb ve 8192 address-family ipv4 unicast route-target export 1:1 evpn route-target import 1:1 evpn ip route 22.0.0.0/24 13.0.0.1 ip route 22.0.0.0/24 13.0.0.2 ip route 22.0.0.0/24 13.0.0.3 ip route 22.0.0.0/24 13.0.0.4 ip route 22.0.0.0/24 13.0.0.5 ip route static bfd 13.0.0.1 13.0.0.9 interval 200 min-rx 300 multiplier 6 ip route static bfd 13.0.0.2 13.0.0.10 ! address-family ipv6 unicast route-target export 1:1 evpn route-target import 1:1 evpn ipv6 route 2000::/64 1001::2 ipv6 route 2000::/64 1002::2 ipv6 route 2000::/64 1003::2 ipv6 route 2000::/64 1004::2 ipv6 route 2000::/64 1005::2 ipv6 route static bfd 1001::2 1001::1 interval 100 min-rx 200 multiplier 5 ipv6 route static bfd 1002::2 1002::1 !