You can configure a community string to
send notifications of significant system issues and events.
About this task
Perform this procedure to configure an
SNMPv2 community string to access device information through SNMP.
- SNMP access is read-only.
- SNMP v2c is the default
version.
Procedure
-
Enter the Config
mode.
device# configure terminal
device(config)#
-
Configure the SNMP v2c community
string.
device (config)# snmp-server community community-name
device (config)# snmp-server community extreme03
It is important to configure
the string correctly. Incorrect string requests are ignored.
-
Exit the configuration mode and
verify that the configured SNMP community is listed with all supported
communities in the output.
device# show snmp server
snmp-server community extreme03
