Create Egress Group

1. Create an egress and add (remove) port interface to the egress.
   

   device (config)# egress name
   device (config)# [no] precedence 10 interface ethernet 0/10  
   device (config)# [no] set encap encap100
   device (config)# [no] set listener-policy lp100

2. Optional: Delete an egress port.
   

   device (config)# no egress name

3. Group the egress ports associated with the egress group.
   

   device (config)# egress-group name
   device (config)# set egress egress-one
   device (config)# set egress egress-two

Example

Adding second interface to an egress is not supported.

device (config)# egress eg-test1
device (config)# [no] precedence 10 interface ethernet 1/4  
device (config)# [no] precedence 10 interface ethernet 1/4 

Error: precedence already exists ethernet 1/4 egress eg-test1.