The following table summarizes the behavior of scope-shift and terminate in the following stages of packet processing:
Note
Ethernet II, Src: 00:00:00_00:00:02 (00:00:00:00:00:02), Dst: 00:00:00_00:00:01 (00:00:00:00:00:01) 802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 100 Internet Protocol Version 4, Src: 1.1.1.1, DST: 7.7.7.7 1st GRE Layer Generic Routing Encapsulation (IP) Internet Protocol Version 4, Src: 2.2.2.2, DST: 8.8.8.8 2nd GRE Layer Generic Routing Encapsulation (IP) Internet Protocol Version 4, Src: 3.3.3.3, DST: 9.9.9.9 3rd GRE Layer Generic Routing Encapsulation (IP) Internet Protocol Version 4, Src: 4.4.4.4, DST: 10.10.10.10 Data (886 bytes)
# | Ingress Group | Route Map | Listener Policy | Expected Behavior |
---|---|---|---|---|
1 | Terminate | Scope-shift | Terminate |
|
2 | Terminate | Scope-shift |
|
|
3 | Terminate | Terminate | Terminate |
|
4 | Terminate | Terminate |
|
|
5 | Terminate | Terminate |
|
|
6 | Scope-shift | Scope-shift | Terminate | Scope-shift is not supported simultaneously in two stages. |
7 | Scope-shift | Scope-shift | Scope-shift is not supported simultaneously in two stages. | |
8 | Scope-shift | Terminate | Terminate |
|
9 | Scope-shift | Terminate |
|
|
10 | Scope-shift | Terminate |
|
|
11 | Scope-shift | Terminate |
|
|
12 | Scope-shift |
|
||
13 | Terminate | Terminate |
|
|
14 | Terminate |
|
||
15 | Terminate |
|
||
16 |
|