You can configure an agent with the
SNMP-trap destination information and community.
Before you begin
This command is available only to users with the admin
role.About this task
You can enable SNMPv1, SNMPv2c, or SNMPv3
traps for a given host, community, or user combination. A maximum of 12 hosts per
community are supported.
Procedure
-
Enter the Config
mode.
device# configure terminal
device(config)#
-
Configure the required
SNMP-trap:
snmp-server { host [ ip-address | host ] comm-user udp-port version [ 1 | 2c | 3 ] }
device(config)# snmp-server host 10.23.17.128 public 162 version 2c
Domain name, IPv4 address,
and IPv6 address are supported as host.
