The following issues were resolved in ExtremeXOS 16.2.3-Patch1-6. ExtremeXOS 16.2.3-Patch1-6 includes all fixes up to and including ExtremeXOS 11.6.5.3, and earlier, ExtremeXOS 12.0.5, ExtremeXOS 12.1.7, ExtremeXOS 12.2.2-patch1-12, ExtremeXOS 12.3.6, ExtremeXOS 12.4.5, ExtremeXOS 12.5.5, ExtremeXOS 12.6.3, ExtremeXOS 12.6.5, ExtremeXOS 12.7.1, ExtremeXOS 15.1.5, ExtremeXOS 15.2.4, ExtremeXOS 15.3.3, ExtremeXOS 15.4.1, ExtremeXOS 15.5.1, ExtremeXOS 15.5.2, ExtremeXOS 15.6.1, ExtremeXOS 15.6.2, ExtremeXOS 15.7.1, ExtremeXOS 16.1, ExtremeXOS 16.1.2, ExtremeXOS 16.1.3, ExtremeXOS 16.2, ExtremeXOS 16.2.2, and ExtremeXOS 16.2.3. For information about those fixes, see the release notes for the specific release.
| CR Number | Description |
|---|---|
| General | |
| xos0062013 | SNMP table extremePortUtilizationExtnTable displays inaccurate value. |
| xos0065400 | VLAN name and tag do not appear correctly when VLAN is created with VLAN name as "tag". |
| xos0066741 | Exsh process ends unexpectedly with signal 6 when downloading the configuration using Zero Touch Provisioning (ZTP) with the DHCP option provided by DHCP server. |
| xos0066923 | Need commands to configure "reload-delay" timer for MLAG ports. |
| xos0066984 | RADIUS-accounting request packet shows incorrect account-terminate reason for user logout from SSH session. |
| xos0067063 | Rtlookup is not able to display all the ECMP routes. |
| xos0067108 | Packets received on STP-blocked ports get forwarded to other STP ports when NetLogin and ONEPolicy are enabled with authentication mode optional. |
| xos0067182 | Authentication on switch using RSA keys stops working if one of the user keys is deleted. |
| xos0067227 | IDMgr entries are not flushed when ARP fast-convergence is on. |
| xos0067323 | FDBs are learned on incorrect VPLS peer on PE switches after include/exclude dot1q tag in P switch. |
| xos0067739 | UDP configuration is lost after reboot with IP DAD enabled. |
| xos0067822 | Memory leak occurs in XMLD process whenever Chalet session refresh happens. |
| xos0068356 | Informational messages appear on the console when an NTP-enabled VLAN becomes inactive. |
| xos0068191 | Nettools process ends unexpectedly with signal 11 while rebooting the switch with 100+ DHCP clients connected via Relay and with Smart Relay enabled. |
| xos0066483 | The encrypted shared secret for TACAS accounting secondary servers does not appear in the configuration. |
| xos0067206 | Unable to login to Chalet with any account that uses an ampersand (&) character. |
| xos0068023 | Hash collision warning message appears with invalid VRID when exceeding hash table limit. |
| xos0066366 | On VPLS network with LAG on access side, clearing FDB on LSRs and LERs results in traffic drop. |
| xos0067271 | FDB mismatch occurs between software and hardware after deleting, and then adding, ISC port multiple times. |
| xos0064790 | Number of used "L4 Port Ranges" count is incorrect in show access-list usage acl-range port output after unconfiguring few ACL rules with "L4 port range" match condition. |
| xos0068374 | With OSPFv3 16-way ECMP, rtlookup for destination shows multiple duplicate entries. |
| xos0063669 |
Erro:RtMgr.Client.ReplyTimeOut messages appear after run failover/reboot: <Warn:EPM.hello_rate> Slot-2: Received hellos from process rtmgr 2 more often then expected 3 <Erro:RtMgr.Client.ReplyTimeOut> Slot-2: Client with ID=0x00000012 Timed out waiting for (ADDUPDRTE). <Erro:RtMgr.Client.ReplyTimeOut> Slot-2: Client with ID=0x00000012 Timed out waiting for (RTEGET). |
| xos0066179 | In Summit X440-24t and E4G-200 series switches, show fan output displays fan state as "Failed" when RPM is 0. |
| xos0067087 | CFM LMR/DMR packets are sent with dot1p value 0. |
| xos0068244 | Error message "Function Pointer Database is not fully initialized" appears during switch bootup with default configuration. |
| xos0066782 | BFD session ends when removing CVID from a service VMAN port. |
| xos0067704 | The process exsh ends unexpectedly after issuing command with include option that uses # via SSH script. |
| xos0068828 | FDB is not learned when ONEPolicy is enabled on the port with authentication mode optional, and the client fails the authentication. |
| BlackDiamond 8800 Series Switches | |
| xos0067807 | On BlackDiamond 8800 series switches, the VRRP process monopolizes 40–50% CPU after disable/enable slot, or after restart ports all when the switch has VRRP enabled on 120 STP-protected VLANs. |
| xos0065937 | Support for dual hash needs to be enabled for BlackDiamond 8800 c-series modules. |
| Summit X670-48t Switches | |
| xos0067652 | After a link-flap, combo ports on Summit X670V-48t switches do not link up sometimes using fiber connection. |