Displaying VLAN information

Do the following to display information about a specific VLAN.

1. Enter the show vlan to display information about VLAN 1.
   

   device# show vlan 1
   VLAN Name State Ports
   (u)-Untagged, (t)-Tagged
   (c)-Converged
   ============================================================
   1 default ACTIVE Eth 0/1(t) Eth 0/4(t) Eth 0/5(t) Eth 0/8(t) 
   

2. Enter the show vlan detail command to display detailed information.
   

   device# show vlan det
   VLAN: 1, Name: default
   Admin state: ACTIVE, Config status: Static
   Number of interfaces: 7
         Eth 0/4, tagged, Static
         Eth 0/3, tagged, Static
         Eth 0/2, tagged, Static
         Eth 0/8, tagged, Static
         Eth 0/6, tagged, Static
         Eth 0/9, untagged, Static
         Po 20, tagged, Static
   VLAN: 10, Name: VLAN0010
   Admin state: ACTIVE, Config status: Static
   Number of interfaces: 3
         Eth 0/3, tagged, Static
         Eth 0/2, tagged, Static
         Eth 0/4, tagged, Static
         Po 20, tagged, Static
   VLAN: 11, Name: VLAN0011
   Admin state: ACTIVE, Config status: Static
   Number of interfaces: 3
         Eth 0/3, tagged, Static
         Eth 0/2, tagged, Static
         Eth 0/4, tagged, Dynamic (MVRP)
   VLAN: 12, Name: VLAN0012
   Admin state: ACTIVE, Config status: Dynamic (MVRP)
   Number of interfaces: 1
         Eth 0/4, tagged, Dynamic (MVRP)
   VLAN: 13, Name: VLAN0013
   Admin state: ACTIVE, Config status: Dynamic (EP tracking)
   Number of interfaces: 1
         Eth 0/6, tagged, Dynamic (EP tracking)
   VLAN: 14, Name: VLAN0014
   Admin state: INACTIVE(member port down), Config status: Static
   Number of interfaces: 1
         Eth 0/8, tagged, Static