You can display the following MVRP information:
To display the global MVRP information on the device including configured ports, global enable status, and timer settings, use the show mvrp command.
device# show mvrp ---------------------------------------------------------------- Total configured mvrp ports : 5 Global Status : Enabled Join-timer(in centiseconds) : 20 Leave-timer(in centiseconds) : 100 Leaveall-timer(in centiseconds) : 1000 ---------------------------------------------------------------- MVRP Port(s): eth0/1, eth0/5, eth0/7, eth0/9, po11
To display the MVRP information for an Ethernet or port-channel interface, use the show mvrp inteface command. This information includes the MVRP status, timer and applicant-mode settings, and information about registered, declared, and forbidden VLANs.
device# show mvrp interface ethernet 0/1 ----------------------------------------------------------------------------------------- MVRP Status : Enabled Join-timer(in centiseconds) : 20 Leave-timer(in centiseconds) : 100 Leaveall-timer(in centiseconds) : 1000 P2p : Yes Applicant Mode : normal-participant ----------------------------------------------------------------------------------------- Registered Vlan(s) : 1 to 60 77 100 to 500 999 Declared Vlan(s) : 1 to 60 77 100 to 500 999 Forbidden Vlan(s) : 10 -----------------------------------------------------------------------------------------
The following example displays the statistics for all interfaces.
device# show mvrp statistics Port : eth0/1 ----------------------------------------------------------------------------- Message type Transmitted Received ----------------------------------------------------------------------------- New 0 0 In 0 1809 Join In 1816 0 Join Empty 1788 0 Empty 0 771 Leave 99 0 Leave-all 264 512 ----------------------------------------------------------------------------- Total PDUs 1827 1293 ----------------------------------------------------------------------------- Port : Po100 ---------------------------------------------------------- Message type Transmitted Received ----------------------------------------------------------------------------- New 0 2 In 693 0 Join In 1800 1777 Join Empty 0 1956 Empty 396 0 Leave 0 96 Leave-all 369 346 ----------------------------------------------------------------------------- Total PDUs 1807 1799 -----------------------------------------------------------------------------
To display attributes for all or specific MVRP-enabled Ethernet or port-channel interfaces including the port and VLAN states, use the show mvrp attributes command.
The following example displays MVRP attributes for all interfaces.
device# show mvrp attributes
Port : eth0/17 State : Disabled
-----------------------------------------------------------------------------
VLAN Registrar Registrar Applicant
State Mgmt State
-----------------------------------------------------------------------------
Port : eth0/5 State : Forwarding
-----------------------------------------------------------------------------
VLAN Registrar Registrar Applicant
State Mgmt State
-----------------------------------------------------------------------------
1 In Fixed Quiet Active
5 Empty Normal Quiet Active
10 In Fixed Quiet Active
Port : po10 State : Forwarding
-----------------------------------------------------------------------------
VLAN Registrar Registrar Applicant
State Mgmt State
-----------------------------------------------------------------------------
1 In Fixed Quiet Active
5 In Normal Very Anxious Observer
10 Empty Normal Quiet Active
The following example displays MVRP attributes for a specified interface.
device# show mvrp attributes interface ethernet 0/5
Port : eth0/5 State : Forwarding
-----------------------------------------------------------------------------
VLAN Registrar Registrar Applicant
State Mgmt State
-----------------------------------------------------------------------------
1 In Fixed Quiet Active
5 Empty Normal Quiet Active
10 In Fixed Quiet Active
The following example displays MVRP attributes for a specified VLAN.
device# show mvrp attributes vlan 10
--------------------------------------------------------------------------------
PORT VLAN Registrar Registrar Applicant
State Mgmt State
--------------------------------------------------------------------------------
eth0/5 10 In Fixed Quiet Active
po10 10 Empty Normal Quiet Active