SNMP CFMv1 and CFMv2 MIB

MIB Information for dot1agCfmDefaultMd scalars

MIB object , OID , Syntax Description Supported (Yes/No)
dot1agCfmDefaultMdDefLevel

OID: 1.3.111.2.802.1.1.8.1.2.1

SYNTAX Dot1agCfmMDLevel MAX-ACCESS read-write STATUS current DEFVAL {0}

A value indicating the MD Level at which MHFs is created, and Sender ID TLV transmission by those MHFs is controlled, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdLevel object contains the value -1. After this initialization, this object needs to be persistent upon reboot or restart of a device. Yes.

Returns fixed value: 0

dot1agCfmDefaultMdDefMhfCreation

OID: 1.3.111.2.802.1.1.8.1.2.2

SYNTAX Dot1agCfmMhfCreation { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3) } MAX-ACCESS read-write STATUS current DEFVAL {defMHFnone}

A value indicating if the Management entity can create MHFs (MIP Half Function) for the VID, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdMhfCreation object contains the value defMHFdefer. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. Yes.

Returns fixed value: defMHFdefault (2)

dot1agCfmDefaultMdDefIdPermission

OID : 1.3.111.2.802.1.1.8.1.2.3

SYNTAX Dot1agCfmIdPermission { sendIdNone (1), sendIdChassis (2), sendIdManage (3), sendIdChassisManage (4) } MAX-ACCESS read-write STATUS current DEFVAL { sendIdNone }

Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdIdPermission object contains the value sendIdDefer. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. Yes.

Returns fixed value: sendIdNone (1)

dot1agCfmMdTable

MIB object , OID , Syntax Description Supported (Yes/No)

dot1agCfmMdTableNextIndex

OID: 1.3.111.2.802.1.1.8.1.5.1

SYNTAX Dot1afCfmIndexIntegerNextFree

MAX-ACCESS read-only

STATUS current

This object contains an unused value for dot1agCfmMdIndex in the dot1agCfmMdTable, or a zero to indicate that none exist.

Yes

dot1agCfmMdIndex

OID: 1.3.111.2.802.1.1.8.1.5.2.1.1

SYNTAX Unsigned32(1..4294967295)

MAX-ACCESS not-accessible

STATUS current

The index to the Maintenance Domain table.dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID.

not-accessible

dot1agCfmMdFormat

OID: 1.3.111.2.802.1.1.8.1.5.2.1.2

SYNTAX Dot1agCfmMaintDomainNameType

MAX-ACCESS read-create

STATUS current

DEFVAL { charString }

The type (and thereby format) of the Maintenance Domain Name.

Yes. Returns fixed value: charString(4)

dot1agCfmMdName

OID: 1.3.111.2.802.1.1.8.1.5.2.1.3

SYNTAX Dot1agCfmMaintDomainName

MAX-ACCESS read-create

STATUS current

DEFVAL { "DEFAULT" }

The Maintenance Domain name. The type/format of this object is determined by the value of the dot1agCfmMdNameType object.

Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain.

Clause 3.24 defines a Maintenance Domain name as the identifier, unique over the domain for which CFM is to protect against accidental concatenation of Service Instances, of a particular Maintenance Domain.

Yes

dot1agCfmMdMdLevel

OID: 1.3.111.2.802.1.1.8.1.5.2.1.4

SYNTAX Dot1agCfmMDLevel

MAX-ACCESS read-create

STATUS current

DEFVAL { 0 }

The Maintenance Domain Level.

Yes.

dot1agCfmMdMhfCreation

OID:1.3.111.2.802.1.1.8.1.5.2.1.5

SYNTAX Dot1agCfmMhfCreation {

defMHFnone (1),

defMHFdefault (2),

defMHFexplicit (3)

}

MAX-ACCESS read-create

STATUS current

DEFVAL { defMHFnone }

Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain.

Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed.

Yes

dot1agCfmMdMhfIdPermission

OID: 1.3.111.2.802.1.1.8.1.5.2.1.6

SYNTAX Dot1agCfmIdPermission {

sendIdNone (1),

sendIdChassis (2),

sendIdManage (3),

sendIdChassisManage (4)

}

MAX-ACCESS read-create

STATUS current

DEFVAL { sendIdNone }

Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed.

Yes

Returns fixed value: sendIdNone (1)

dot1agCfmMdMaNextIndex 1.3.111.2.802.1.1.8.1.5.2.1.7 SYNTAX Dot1afCfmIndexIntegerNextFree

MAX-ACCESS read-only

STATUS current

Value to be used as the index of the MA table entries, both the dot1agCfmMaNetTable and the dot1agCfmMaCompTable, for this Maintenance Domain when the management entity wants to create a new row in those tables.

Yes

dot1agCfmMdRowStatus

OID: 1.3.111.2.802.1.1.8.1.5.2.1.8

SYNTAX RowStatus

MAX-ACCESS read-create

STATUS current

The status of the row.

The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.

Yes

Returns fixed value: active (1)

dot1agCfmMaNetTable

MIB object , OID , Syntax Description Supported (Yes/No)
1 dot1agCfmMaIndex

OID: 1.3.111.2.802.1.1.8.1.6.1.1.1

SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current

Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation. not-accessible
dot1agCfmMaNetFormat

OID: 1.3.111.2.802.1.1.8.1.6.1.1.2

SYNTAX Dot1agCfmMaintAssocNameType MAX-ACCESS read-create STATUS current

The type (and thereby format) of the Maintenance Association Name. Yes. Returns fixed value: charString(2)
dot1agCfmMaNetName

OID: 1.3.111.2.802.1.1.8.1.6.1.1.3

SYNTAX Dot1agCfmMaintAssocName MAX-ACCESS read-create STATUS current

The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name MUST be unique within a maintenance domain. Yes
dot1agCfmMaNetCcmInterval

OID: 1.3.111.2.802.1.1.8.1.6.1.1.4

SYNTAX Dot1agCfmCcmInterval MAX-ACCESS read-create STATUS current

Interval between CCM transmissions to be used by all MEPs in the MA. Yes
dot1agCfmMaNetRowStatus

OID: 1.3.111.2.802.1.1.8.1.6.1.1.5

SYNTAX RowStatus MAX-ACCESS read-create STATUS current

The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. Yes. Returns fixed value: active (1)

dot1agCfmMaMepListTable

MIB object , OID , Syntax Description Supported (Yes/No)
dot1agCfmMaMepListIdentifier

OID: 1.3.111.2.802.1.1.8.1.6.3.1.1

SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current

MEPID. not-accessible
dot1agCfmMaMepListRowStatus

OID: 1.3.111.2.802.1.1.8.1.6.3.1.2

SYNTAX RowStatus MAX-ACCESS read-create STATUS current

The status of the row. Read SNMPv2-TC (RFC1903) for an explanation of the possible values this object can take. Yes. Returns fixed value: active (1)

ieee8021CfmMaCompTable

MIB object , OID , Syntax Description Supported (Yes/No)
ieee8021CfmMaComponentId

OID: 1.3.111.2.802.1.1.8.1.6.4.1.1

SYNTAX IEEE8021PbbComponentIdentifier MAX-ACCESS not-accessible STATUS current

The bridge component within the system to which the information in this ieee8021CfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. not-accessible
ieee8021CfmMaCompPrimarySelectorType

OID: 1.3.111.2.802.1.1.8.1.6.4.1.2

SYNTAX IEEE8021ServiceSelectorType MAX-ACCESS read-create STATUS current

Type of the Service Selector identifiers indicated by ieee8021CfmMaCompPrimarySelectorOrNone. If the service instance is defined by more than one Service Selector, this parameter also indicates the type of the ieee8021CfmVlanPrimarySelector and ieee8021CfmVlanSelector in the ieee8021CfmVlanTable. In Services instances made of multiple Service Selector identifiers, ensures that the type of the Service selector identifiers is the same. See textual convention Dot1agCfmServiceSelectorType for details. Yes
ieee8021CfmMaCompPrimarySelectorOrNone

OID: 1.3.111.2.802.1.1.8.1.6.4.1.3

SYNTAX IEEE8021ServiceSelectorValueOrNone MAX-ACCESS read-create STATUS current

Service Selector identifier to which the MP is attached, or 0, if none. If the MA is associated with more than one Service Selectors Identifiers, the ieee8021CfmVlanTable lists them. Yes
ieee8021CfmMaCompMhfCreation

OID: 1.3.111.2.802.1.1.8.1.6.4.1.4

SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-create STATUS current

Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. Yes
ieee8021CfmMaCompIdPermission

OID: 1.3.111.2.802.1.1.8.1.6.4.1.5

SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-create STATUS current

Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. Yes. Returns fixed value: sendIdNone(1)
ieee8021CfmMaCompNumberOfVids

OID: 1.3.111.2.802.1.1.8.1.6.4.1.6

SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current

The number of VIDs associated with the MA. Yes
ieee8021CfmMaCompRowStatus

OID: 1.3.111.2.802.1.1.8.1.6.4.1.7

SYNTAX RowStatus MAX-ACCESS read-create STATUS current

The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. Yes. Returns fixed value: active (1)

dot1agCfmMepTable

MIB object , OID , Syntax Description Supported (Yes/No)
dot1agCfmMepIdentifier

OID: 1.3.111.2.802.1.1.8.1.7.1.1.1

SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current

Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association End Point (3.19). MEP Identifier is also known as the MEPID. not-accessible
dot1agCfmMepIfIndex

OID: 1.3.111.2.802.1.1.8.1.7.1.1.2

SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current

This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL set this variable to 0. Yes
dot1agCfmMepDirection

OID: 1.3.111.2.802.1.1.8.1.7.1.1.3

SYNTAX Dot1agCfmMpDirection MAX-ACCESS read-create STATUS current

The direction in which the MEP faces on the Bridge port. Yes
dot1agCfmMepPrimaryVid

OID: 1.3.111.2.802.1.1.8.1.7.1.1.4

SYNTAX Unsigned32(0..16777215) MAX-ACCESS read-create STATUS current

An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of the MEP's MA, or that the MEP's MA is associated with no VID. Yes
dot1agCfmMepActive

OID: 1.3.111.2.802.1.1.8.1.7.1.1.5

SYNTAX TruthValue MAX-ACCESS read-create STATUS current

Administrative state of the MEPA Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that it is to cease functioning. Yes
dot1agCfmMepFngState

OID: 1.3.111.2.802.1.1.8.1.7.1.1.6

SYNTAX Dot1agCfmFngState MAX-ACCESS read-only STATUS current

Current state of the MEP Fault Notification Generator State Machine. Yes
dot1agCfmMepCciEnabled

OID: 1.3.111.2.802.1.1.8.1.7.1.1.7

SYNTAX TruthValue MAX-ACCESS read-create STATUS current

If set to true, the MEP will generate CCM messages. Yes
dot1agCfmMepCcmLtmPriority

OID: 1.3.111.2.802.1.1.8.1.7.1.1.8

SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current

The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for this variable from the priority regeneration table by extracting the highest priority value in this table on this MEPs bridge port. (1 is lowest, then 2, then 0, then 3-7). Yes
dot1agCfmMepMacAddress

OID: 1.3.111.2.802.1.1.8.1.7.1.1.9

SYNTAX MacAddress MAX-ACCESS read-only STATUS current

MAC address of the MEP. Yes
dot1agCfmMepLowPrDef

OID: 1.3.111.2.802.1.1.8.1.7.1.1.10

SYNTAX Dot1agCfmLowestAlarmPri MAX-ACCESS read-create STATUS current

An integer value specifying the lowest priority defect that is allowed to generate fault alarm. Yes Returns fixed value: 0
dot1agCfmMepFngAlarmTime

OID: 1.3.111.2.802.1.1.8.1.7.1.1.11

SYNTAX TimeInterval (250..1000) MAX-ACCESS read-create STATUS current

The time that defects MUST be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). Yes
dot1agCfmMepFngResetTime

OID: 1.3.111.2.802.1.1.8.1.7.1.1.12

SYNTAX TimeInterval (250..1000) MAX-ACCESS read-create STATUS current

The time that defects MUST be absent before resetting a Fault Alarm (fngResetTime, 20.33.4) (default 10s).. Yes
dot1agCfmMepHighestPrDefec

OID: 1.3.111.2.802.1.1.8.1.7.1.1.13

SYNTAX Dot1agCfmHighestDefectPri MAX-ACCESS read-only STATUS current

The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. No Returns fixed value: 0
dot1agCfmMepDefects

OID: 1.3.111.2.802.1.1.8.1.7.1.1.14

SYNTAX Dot1agCfmMepDefects MAX-ACCESS read-only STATUS current

A vector of Boolean error conditions from Table 20-1, any of which may be true:DefRDICCM(0)DefMACstatus(1)DefRemoteCCM(2)DefErrorCCM(3)DefXconCCM(4). Yes
dot1agCfmMepErrorCcmLastFailure

OID: 1.3.111.2.802.1.1.8.1.7.1.1.15

SYNTAX OCTET STRING (SIZE(1..1522)) MAX-ACCESS read-only STATUS current

The last-received CCM that triggered an DefErrorCCM fault. Yes
dot1agCfmMepXconCcmLastFailure

OID: 1.3.111.2.802.1.1.8.1.7.1.1.16

SYNTAX OCTET STRING (SIZE(1..1522)) MAX-ACCESS read-only STATUS current

The last-received CCM that triggered a DefXconCCM fault. Yes
dot1agCfmMepCcmSequenceErrors

OID: 1.3.111.2.802.1.1.8.1.7.1.1.17

SYNTAX Counter32 MAX-ACCESS read-only STATUS current

The total number of out-of-sequence CCMs received from all remote MEPs. Yes
dot1agCfmMepCciSentCcms

OID: 1.3.111.2.802.1.1.8.1.7.1.1.18

SYNTAX Counter32 MAX-ACCESS read-only STATUS current

Total number of Continuity Check messages transmitted. Yes Returns fixed value: 0
dot1agCfmMepNextLbmTransId

OID: 1.3.111.2.802.1.1.8.1.7.1.1.19

SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current

Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around. Yes
dot1agCfmMepLbrIn

OID: 1.3.111.2.802.1.1.8.1.7.1.1.20

SYNTAX Counter32 MAX-ACCESS read-only STATUS current

Total number of valid, in-order Loopback Replies received. Yes
dot1agCfmMepLbrInOutOfOrder

OID: 1.3.111.2.802.1.1.8.1.7.1.1.21

SYNTAX Counter32 MAX-ACCESS read-only STATUS current

The total number of valid, out-of-order Loopback Replies received. Yes
dot1agCfmMepLbrBadMsdu

OID: 1.3.111.2.802.1.1.8.1.7.1.1.22

SYNTAX Counter32 MAX-ACCESS read-only STATUS current

The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3). Yes Returns fixed value: 0
dot1agCfmMepLtmNextSeqNumber

OID: 1.3.111.2.802.1.1.8.1.7.1.1.23

SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current

Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around. Yes
dot1agCfmMepUnexpLtrIn

OID: 1.3.111.2.802.1.1.8.1.7.1.1.24

SYNTAX Counter32 MAX-ACCESS read-only STATUS current

The total number of unexpected LTRs received (20.39.1). Yes
dot1agCfmMepLbrOut

OID: 1.3.111.2.802.1.1.8.1.7.1.1.25

SYNTAX Counter32 MAX-ACCESS read-only STATUS current

Total number of Loopback Replies transmitted. Yes
dot1agCfmMepTransmitLbmStatus

OID: 1.3.111.2.802.1.1.8.1.7.1.1.26

SYNTAX TruthValue MAX-ACCESS read-create STATUS current

A Boolean flag set to true by the MEP Loopback Initiator State Machine or an MIB manager to indicate that another LBM is being transmitted. Reset to false by the MEP Loopback Initiator State Machine. Yes
dot1agCfmMepTransmitLbmDestMacAddress

OID: 1.3.111.2.802.1.1.8.1.7.1.1.27

SYNTAX MacAddress MAX-ACCESS read-create STATUS current

The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLbmDestIsMepId is 'false'. Yes
dot1agCfmMepTransmitLbmDestMepId

OID: 1.3.111.2.802.1.1.8.1.7.1.1.28

SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current

The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the column dot1agCfmMepTransmitLbmDestIsMepId is 'true'. Yes
dot1agCfmMepTransmitLbmDestIsMepId

OID: 1.3.111.2.802.1.1.8.1.7.1.1.29

SYNTAX TruthValue MAX-ACCESS read-create STATUS current

True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.. Yes
dot1agCfmMepTransmitLbmMessages

OID: 1.3.111.2.802.1.1.8.1.7.1.1.30

SYNTAX Integer32(1..1024) MAX-ACCESS read-create STATUS current

The number of Loopback messages to be transmitted. Yes
dot1agCfmMepTransmitLbmDataTlv

OID: 1.3.111.2.802.1.1.8.1.7.1.1.31

SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current

An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. The intent is to be able to fill the frame carrying the CFM PDU to its maximum length. This may lead to fragmentation in some cases. Yes Returns fixed value: "" (empty string)
dot1agCfmMepTransmitLbmVlanPriority

OID: 1.3.111.2.802.1.1.8.1.7.1.1.32

SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current

Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. Yes
dot1agCfmMepTransmitLbmVlanDropEnable

OID: 1.3.111.2.802.1.1.8.1.7.1.1.33

SYNTAX TruthValue MAX-ACCESS read-create STATUS current

Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. Yes Returns fixed value: false (2)
dot1agCfmMepTransmitLbmResultOK

OID: 1.3.111.2.802.1.1.8.1.7.1.1.34

SYNTAX TruthValue MAX-ACCESS read-only STATUS current

Indicates the result of the operation:- true The Loopback Message(s) will be(or has been) sent.- false The Loopback Message(s) will notbe sent. Yes
dot1agCfmMepTransmitLbmSeqNumber

OID: 1.3.111.2.802.1.1.8.1.7.1.1.35

SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current

The Loopback Transaction Identifier (dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if dot1agCfmMepTransmitLbmResultOK is false. Yes
dot1agCfmMepTransmitLtmStatus

OID: 1.3.111.2.802.1.1.8.1.7.1.1.36

SYNTAX TruthValue MAX-ACCESS read-create STATUS current

A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine. Yes
dot1agCfmMepTransmitLtmFlags

OID: 1.3.111.2.802.1.1.8.1.7.1.1.37

SYNTAX BITS { useFDBonly (0) } MAX-ACCESS read-create STATUS current

The flags field for LTMs transmitted by the MEP. Yes Returns fixed value: 0
dot1agCfmMepTransmitLtmTargetMacAddress

OID: 1.3.111.2.802.1.1.8.1.7.1.1.38

SYNTAX MacAddress MAX-ACCESS read-create STATUS current

The Target MAC Address Field to be transmitted: A unicast destination MAC address.T his address will be used if the value of the column dot1agCfmMepTransmitLtmTargetIsMepId is 'false'. Yes
dot1agCfmMepTransmitLtmTargetMepId

OID: 1.3.111.2.802.1.1.8.1.7.1.1.39

SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current

An indication of the Target MAC Address Field to be transmitted. The Maintenance association End Point Identifier of another MEP in the same Maintenance Association. This address will be used if the value of the column dot1agCfmMepTransmitLtmTargetIsMepId is 'true'. Yes
dot1agCfmMepTransmitLtmTargetIsMepId

OID: 1.3.111.2.802.1.1.8.1.7.1.1.40

SYNTAX TruthValue MAX-ACCESS read-create STATUS current

True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. Yes
dot1agCfmMepTransmitLtmTtl

OID: 1.3.111.2.802.1.1.8.1.7.1.1.41

SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current

The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that handles the LTM. The value returned in the LTR is one less than that received in the LTM. If the LTM TTL is 0 or 1, the LTM is not forwarded to the next hop, and if 0, no LTR is generated. Yes
dot1agCfmMepTransmitLtmResult

OID: 1.3.111.2.802.1.1.8.1.7.1.1.42 SYNTAX TruthValue MAX-ACCESS read-only STATUS current

Indicates the result of the operation:- true The Linktrace Message will be (or has been) sent.- false The Linktrace Message will not be sent. Yes
dot1agCfmMepTransmitLtmSeqNumber

OID: 1.3.111.2.802.1.1.8.1.7.1.1.43 SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current

The LTM Transaction Identifier (dot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false. Yes Returns fixed value: 0
dot1agCfmMepTransmitLtmEgressIdentifier

OID: 1.3.111.2.802.1.1.8.1.7.1.1.44

SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-create STATUS current

Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM.The low-order six octets contain a 48-bit IEEE MAC address unique to the system in which the MEP Linktrace Initiator or Linktrace Responder resides. The high-order two octets contain a value sufficient to uniquely identify the MEP Linktrace Initiator or Linktrace Responder within that system. For most Bridges, the address of any MAC attached to the Bridge will suffice for the low-order six octets, and 0 for the high-order octets. In some situations, e.g., if multiple virtual Bridges utilizing emulated LANs are implemented in a single physical system, the high-order two octets can be used to differentiate among the transmitting entities. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false. Yes
dot1agCfmMepRowStatus

OID: 1.3.111.2.802.1.1.8.1.7.1.1.45

SYNTAX RowStatus MAX-ACCESS read-create STATUS current

The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. Yes Returns fixed value: active (1)

dot1agCfmLtrTable

MIB object , OID , Syntax Description Supported (Yes/No)
dot1agCfmLtrSeqNumber

1.3.111.2.802.1.1.8.1.7.2.1.1

SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current

Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. not-accessible
dot1agCfmLtrReceiveOrder

OID: 1.3.111.2.802.1.1.8.1.7.2.1.2

SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current

An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. dot1agCfmLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. not-accessible
dot1agCfmLtrTtl

1.3.111.2.802.1.1.8.1.7.2.1.3

SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current

TTL field value for a returned LTR. Yes
dot1agCfmLtrForwarded

OID: 1.3.111.2.802.1.1.8.1.7.2.1.4

SYNTAX TruthValue MAX-ACCESS read-only STATUS current

Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. Yes
dot1agCfmLtrTerminalMep

OID: 1.3.111.2.802.1.1.8.1.7.2.1.5

SYNTAX TruthValue MAX-ACCESS read-only STATUS current

A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. Yes
dot1agCfmLtrLastEgressIdentifier

OID: 1.3.111.2.802.1.1.8.1.7.2.1.6

SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current

An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR.The Last Egress Identifier identifies the MEP Linktrace Initiator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM. Yes
dot1agCfmLtrNextEgressIdentifier

OID: 1.3.111.2.802.1.1.8.1.7.2.1.7

SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current

An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, that is, any value can be transmitted, and the field is ignored by the receiver. Yes
dot1agCfmLtrRelay

OID: 1.3.111.2.802.1.1.8.1.7.2.1.8

SYNTAX Dot1agCfmRelayActionFieldValue MAX-ACCESS read-only STATUS current

Value returned in the Relay Action field. Yes
dot1agCfmLtrChassisIdSubtype

OID: 1.3.111.2.802.1.1.8.1.7.2.1.9

SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current

This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the dot1agCfmLtrChassisId has a length of 0." Yes Return fixed value: local(7)
dot1agCfmLtrChassisId

OID: 1.3.111.2.802.1.1.8.1.7.2.1.10

SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current

The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object. Yes Return fixed value: "" (empty string)
dot1agCfmLtrManAddressDomain

OID: 1.3.111.2.802.1.1.8.1.7.2.1.11

SYNTAX TDomain MAX-ACCESS read-only STATUS current

The TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the LTR. Received in the LTR Sender ID TLV from that system. Typical values will be one of (not all inclusive) list:snmpUDPDomain (from SNMPv2-TM, RFC3417)snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. Yes Returns fixed value: {0, 0}
dot1agCfmLtrManAddress

OID: 1.3.111.2.802.1.1.8.1.7.2.1.12

SYNTAX TAddress MAX-ACCESS read-only STATUS current

The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system.If the related object dot1agCfmLtrManAddressDomain contains the value 'zeroDotZero', this object dot1agCfmLtrManAddress MUST have a zero-length OCTET STRING as a value. Yes Returns fixed value: "" (empty string)
dot1agCfmLtrIngress

OID: 1.3.111.2.802.1.1.8.1.7.2.1.13

SYNTAX Dot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current

The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM. Yes
dot1agCfmLtrIngressMac

OID: 1.3.111.2.802.1.1.8.1.7.2.1.14

SYNTAX MacAddress MAX-ACCESS read-only STATUS current

MAC address returned in the ingress MAC address field. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless Yes
dot1agCfmLtrIngressPortIdSubtype

OID: 1.3.111.2.802.1.1.8.1.7.2.1.15

SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current

Format of the Ingress Port ID.If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless. Yes
dot1agCfmLtrIngressPortId

OID: 1.3.111.2.802.1.1.8.1.7.2.1.16

SYNTAX LldpPortId MAX-ACCESS read-only STATUS current

Ingress Port ID. The format of this object is determined by the value of the dot1agCfmLtrIngressPortIdSubtype object. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless. Yes
dot1agCfmLtrEgress

OID: 1.3.111.2.802.1.1.8.1.7.2.1.17

SYNTAX Dot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current

The value returned in the Egress Action Field of the LTM. The value egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTM. Yes
dot1agCfmLtrEgressMac

OID: 1.3.111.2.802.1.1.8.1.7.2.1.18

SYNTAX MacAddress MAX-ACCESS read-only STATUS current

MAC address returned in the egress MAC address field. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. Yes
dot1agCfmLtrEgressPortIdSubtype

OID: 1.3.111.2.802.1.1.8.1.7.2.1.19

SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current

Format of the egress Port ID.If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. Yes
dot1agCfmLtrEgressPortId

OID: 1.3.111.2.802.1.1.8.1.7.2.1.20

SYNTAX LldpPortId MAX-ACCESS read-only STATUS current

Egress Port ID. The format of this object is determined by the value of the dot1agCfmLtrEgressPortIdSubtype object. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. Yes
dot1agCfmLtrOrganizationSpecificTlv

OID: 1.3.111.2.802.1.1.8.1.7.2.1.21

SYNTAX OCTET STRING (SIZE(0|4..1500)) MAX-ACCESS read-only STATUS current

All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together. Yes Returns fixed value: "" (empty string)

dot1agCfmMepDbTable

MIB object , OID , Syntax Description Supported (Yes/No)
dot1agCfmMepDbRMepIdentifier

OID: 1.3.111.2.802.1.1.8.1.7.3.1.1

SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current

Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned. not-accessible
dot1agCfmMepDbRMepState

OID: 1.3.111.2.802.1.1.8.1.7.3.1.2

SYNTAX Dot1agCfmRemoteMepState MAX-ACCESS read-only STATUS current

The operational state of the remote MEP IFF State machines. Yes
dot1agCfmMepDbRMepFailedOkTime

OID: 1.3.111.2.802.1.1.8.1.7.3.1.3

SYNTAX TimeStamp MAX-ACCESS read-only STATUS current

The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. Yes
dot1agCfmMepDbMacAddress

OID: 1.3.111.2.802.1.1.8.1.7.3.1.4

SYNTAX MacAddress MAX-ACCESS read-only STATUS current

The MAC address of the remote MEP. Yes
dot1agCfmMepDbRdi

1.3.111.2.802.1.1.8.1.7.3.1.5

SYNTAX TruthValue MAX-ACCESS read-only STATUS current

State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. Yes
dot1agCfmMepDbPortStatusTlv

OID: 1.3.111.2.802.1.1.8.1.7.3.1.6

SYNTAX Dot1agCfmPortStatus MAX-ACCESS read-only STATUS current

An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been received, or that nor port status TLV was received in the last CCM. Yes
dot1agCfmMepDbInterfaceStatusTlv

OID: 1.3.111.2.802.1.1.8.1.7.3.1.7

SYNTAX Dot1agCfmInterfaceStatus MAX-ACCESS read-only STATUS current

An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no CCM has been received, or that no interface status TLV was received in the last CCM. Yes
dot1agCfmMepDbChassisIdSubtype

OID: 1.3.111.2.802.1.1.8.1.7.3.1.8

SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current

This object specifies the format of the Chassis ID received in the last CCM. Yes Returns fixed value: local(7)
dot1agCfmMepDbChassisId

OID: 1.3.111.2.802.1.1.8.1.7.3.1.9

SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current

The Chassis ID. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object. Yes Returns fixed value: "" (empty string)
dot1agCfmMepDbManAddressDomain

OID: 1.3.111.2.802.1.1.8.1.7.3.1.10

SYNTAX TDomain MAX-ACCESS read-only STATUS current

The TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CCM. Received in the CCM Sender ID TLV from that system. Typical values will be one of (not all inclusive) list:snmpUDPDomain (from SNMPv2-TM, RFC3417)snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. Yes Returns fixed value: {0,0}
dot1agCfmMepDbManAddress

OID: 1.3.111.2.802.1.1.8.1.7.3.1.11

SYNTAX TAddress MAX-ACCESS read-only STATUS current

The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system.If the related object dot1agCfmMepDbManAddressDomain contains the value 'zeroDotZero', this object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value Yes Returns fixed value: "" (empty string)

Traps

MIB Information for dot1agNotifications
Notification, OID Object Description Supported (Yes/No)
dot1agCfmFaultAlarm

OID: 1.3.111.2.802.1.1.8.0.1STATUS current

dot1agCfmMepHighestPrDefect A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP has a persistent defect, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. If a defect with a higher priority is raised after a Fault Alarm has been issued, another Fault Alarm is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the dot1agCfmMepHighestPrDefect variable in the notification:dot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry(dot1agCfmMdTable).dot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (dot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry(dot1agCfmMaCompTable).dot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (dot1agCfmMepTable). Yes