The following table specifies all MIB objects that are supported for in and out interface statistics and interface utilization.
| Objects and OID | Access | Description |
|---|---|---|
|
bcsiIfStatsTable 1.3.6.1.4.1.1588.3.1.11.1.1 Syntax: Sequence of BcsiIfStatsEntry |
None | This table consists of in and out interface statistics value, and in and out interface utilization value. |
|
bcsiIfStatsEntry 1.3.6.1.4.1.1588.3.1.11.1.1.1 Syntax: BcsiIfStatsEntry |
None | An entry in the bcsiIfStats table that indicates the statistics and utilization on an interface. |
|
bcsiIfStatsInBitsPerSec 1.3.6.1.4.1.1588.3.1.11.1.1.1.1 Syntax: CounterBasedGauge64 |
Read-only | This object holds the number of bits per second received on the interface. |
|
bcsiIfStatsOutBitsPerSec 1.3.6.1.4.1.1588.3.1.11.1.1.1.2 Syntax: CounterBasedGauge64 |
Read-only | This object holds the number of bits per second transmitted out of the interface. |
|
bcsiIfStatsInPktsPerSec 1.3.6.1.4.1.1588.3.1.11.1.1.1.3 Syntax: Gauge32 |
Read-only | This object holds the number of packets per second received on the interface. |
|
bcsiIfStatsOutPktsPerSec 1.3.6.1.4.1.1588.3.1.11.1.1.1.4 Syntax: Gauge32 |
Read-only | This object holds the number of packets per second transmitted out of the interface. |
|
bcsiIfStatsInUtilization 1.3.6.1.4.1.1588.3.1.11.1.1.1.5 Syntax: Unsigned32 |
Read-only | This object holds the input network utilization in hundredths of a percent. |
|
bcsiIfStatsOutUtilization 1.3.6.1.4.1.1588.3.1.11.1.1.1.6 Syntax: Unsigned32 |
Read-only | This object holds the output network utilization in hundredths of a percent. |
|
bcsilfStatsInJumboFrames 1.3.6.1.4.1.1588.3.1.11.1.1.1.7 Syntax:Counter64 |
Read-only | This object holds the total number of jumbo packets received on the interface. |
|
bcsiIfWatermarkTable 1.3.6.1.4.1.1588.3.1.11.1.2 Syntax: Sequence of BcsiIfWatermarkEntry |
None |
It is the table to display the highest and lowest Tx/Rx BitRate and PktRate of a port for the current and previous 1 hour or 24 hour window. |