Note
BGP-4 MIB is VRF-aware.| Objects and OID | Supported | Description |
|---|---|---|
|
bgpVersion 1.3.6.1.2.1.15.1 |
Yes | The version of the BGP protocol. |
|
bgpLocalAs 1.3.6.1.2.1.15.2 |
Yes | The local autonomous system number. |
|
bgpPeerTable 1.3.6.1.2.1.15.3 |
Yes | This table contains information about BGP peers. |
|
bgpIdentifier 1.3.6.1.2.1.15.4 |
Yes | The BGP identifier of the local system. |
|
bgp4PathAttrTable 1.3.6.1.2.1.15.6 |
Yes | This table contains information about paths to destination networks received from all BGP peers. |
| Objects and OID | Supported | Description |
|---|---|---|
| bgpEstablishedNotification OID 1.3.6.1.2.1.15.0.1 | Yes | The BGP Established event is generated whenthe BGP FSM enters the ESTABLISHED state. The objects that will be supported are: bgpPeerRemoteAddr, bgpPeerLastError, and bgpPeerState |
| bgpBackwardTransNotification OID 1.3.6.1.2.1.15.0.2 | Yes | The bgpBackwardTransNotification event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The objects that will be supported are: bgpPeerRemoteAddr, bgpPeerLastError, and bgpPeerState. This trap will be generated only when transition happened from established to any lower state. |
| bgpPeerRemoteAddr 1.3.6.1.2.1.15.3.1.7 | Yes | The remote IP address of this entry's BGPpeer. |
| bgpPeerState 1.3.6.1.2.1.15.3.1.2 | Yes | The BGP peer connection state. |
| bgpPeerLastError 1.3.6.1.2.1.15.3.1.14 | Yes |
The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. |
| Objects and OID | Supported | Description |
|---|---|---|
| bgpPeerEntry 1.3.6.1.2.1.15.3.1 | yes | Entry containing information about the connection with a BGP peer. |
| bgpPeerIdentifier 1.3.6.1.2.1.15.3.1.1 | yes | The BGP Identifier of this entry's BGP peer. |
| bgpPeerState 1.3.6.1.2.1.15.3.1.2 | yes | The BGP peer connection state. |
| bgpPeerAdminStatus 1.3.6.1.2.1.15.3.1.3 | yes | The desired state of the BGP connection.A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. |
| bgpPeerNegotiatedVersion 1.3.6.1.2.1.15.3.1.4 | yes | The negotiated version of BGP running between the two peers. |
| bgpPeerLocalAddr 1.3.6.1.2.1.15.3.1.5 | yes | The local IP address of this entry's BGP connection. |
| bgpPeerLocalPort 1.3.6.1.2.1.15.3.1.6 | yes | The local port for the TCP connection between the BGP peers. |
| bgpPeerRemoteAddr 1.3.6.1.2.1.15.3.1.7 | yes | The remote IP address of this entry's BGP peer. |
| bgpPeerRemotePort 1.3.6.1.2.1.15.3.1.8 | yes | The remote port for the TCP connection between the BGP peers. Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort, |
| bgpPeerRemoteAs 1.3.6.1.2.1.15.3.1.9 | yes | The remote autonomous system number. |
| bgpPeerInUpdates 1.3.6.1.2.1.15.3.1.10 | yes | The number of BGP UPDATE messages received on this connection. |
| bgpPeerOutUpdates 1.3.6.1.2.1.15.3.1.11 | yes | The number of BGP UPDATE messages transmitted on this connection. |
| bgpPeerInTotalMessages 1.3.6.1.2.1.15.3.1.12 | yes | The total number of messages received from the remote peer on this connection. |
| bgpPeerOutTotalMessages 1.3.6.1.2.1.15.3.1.13 | yes | The total number of messages transmitted to the remote peer on this connection. |
| bgpPeerLastError 1.3.6.1.2.1.15.3.1.14 | yes | The last error code and sub-code seen by thispeer on this connection. If no error has occurred, this field is zero. |
| bgpPeerFsmEstablishedTransitions 1.3.6.1.2.1.15.3.1.15 | yes | The total number of times the BGP FSM transitioned into the established state. |
| bgpPeerFsmEstablishedTime 1.3.6.1.2.1.15.3.1.16 | yes | This timer indicates how long (in seconds) this peer has been in the Established state. |
| bgpPeerConnectRetryInterval 1.3.6.1.2.1.15.3.1.17 | yes | Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. |
| bgpPeerHoldTime 1.3.6.1.2.1.15.3.1.18 | yes | Time interval in seconds for the HoldTimer established with the peer. |
| bgpPeerKeepAlive 1.3.6.1.2.1.15.3.1.19 | yes | Time interval in seconds for the KeepAlivetimer established with the peer. |
| bgpPeerHoldTimeConfigured 1.3.6.1.2.1.15.3.1.20 | yes | Time interval in seconds for the Hold Timeconfigured for this BGP speaker with this peer. |
| bgpPeerKeepAliveConfigured 1.3.6.1.2.1.15.3.1.21 | yes | Time interval in seconds for theKeepAlive timer configured for this BGPspeaker with this peer. |
| bgpPeerMinASOriginationInterval 1.3.6.1.2.1.15.3.1.22 | yes | Time interval in seconds for theMinASOriginationInterval timer.The suggested value for this timer is 15seconds. |
| bgpPeerMinRouteAdvertisementInterval 1.3.6.1.2.1.15.3.1.23 | yes | Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30seconds. |
| bgpPeerInUpdateElapsedTime 1.3.6.1.2.1.15.3.1.24 | yes | Elapsed time in seconds since the last BGPUPDATE message was received from the peer. |
| Objects and OID | Supported | Description |
|---|---|---|
| bgp4PathAttrTable 1.3.6.1.2.1.15.6 | yes | The BGP-4 Received Path Attribute Table contains information about paths todestination networks received from alBGP4 peers. |
| bgp4PathAttrEntry 1.3.6.1.2.1.15.6.1 | yes | Information about a path to a network. |
| bgp4PathAttrPeer 1.3.6.1.2.1.15.6.1.1 | yes | The IP address of the peer where the path information was learned. |
| bgp4PathAttrIpAddrPrefixLen 1.3.6.1.2.1.15.6.1.2 | yes | Length in bits of the IP address prefix in the Network Layer Reachability Information field. |
| bgp4PathAttrIpAddrPrefix 1.3.6.1.2.1.15.6.1.3 | yes | An IP address prefix in the Network Layer Reachability Information field. |
| bgp4PathAttrOrigin 1.3.6.1.2.1.15.6.1.4 | yes | The ultimate origin of the path information. |
| bgp4PathAttrASPathSegment 1.3.6.1.2.1.15.6.1.5 | yes | The sequence of AS path segments. Each ASpath segment is represented by a triple. |
| bgp4PathAttrNextHop 1.3.6.1.2.1.15.6.1.6 | yes | The address of the border router that should be used for the destination network. |
| bgp4PathAttrMultiExitDisc 1.3.6.1.2.1.15.6.1.7 | yes | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. |
| bgp4PathAttrLocalPref 1.3.6.1.2.1.15.6.1.8 | yes | The originating BGP4 speaker's degree of preference for an advertised route. |
| bgp4PathAttrAtomicAggregate 1.3.6.1.2.1.15.6.1.9 | yes | Whether or not the local system has selected a less specific route without selecting a more specific route. |
| bgp4PathAttrAggregatorAS 1.3.6.1.2.1.15.6.1.10 | yes | The AS number of the last BGP4 speaker that performed route aggregation. |
| bgp4PathAttrAggregatorAddr 1.3.6.1.2.1.15.6.1.11 | yes | The IP address of the last BGP4 speaker that performed route aggregation. |
| bgp4PathAttrCalcLocalPref 1.3.6.1.2.1.15.6.1.12 | yes | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. |
| bgp4PathAttrBest 1.3.6.1.2.1.15.6.1.13 | yes | An indication of whether or not this routewas chosen as the best BGP4 route. |
| bgp4PathAttrUnknown 1.3.6.1.2.1.15.6.1.14 | yes | One or more path attributes not understoodby this BGP4 speaker. Size zero (0)indicates the absence of such attribute(s). |