About this task
Mount the AP so that the glands are on the side of the AP closest
to the ground, and not above the plastic cover. You must provide a 3-inch drip loop
on all cables. For more information, see Forming a Drip Loop for AP3965e Cables.
Procedure
-
Using the mounting bracket as a guide, mark the
location for the mounting screws on a wall.
-
Drill four holes into the wall as follows:
- for installing the AP on a masonry wall, use a 5/16” diameter bit.
- for other materials, use the appropriate drill for the screws being
used.
-
For masonry installations, place four anchor assemblies into the holes.
