AP5050U Features

• Radios:
  • Tri-radio design 2.4 GHz (4x4:4), 5 GHz (4x4:4) and 6 GHz (4x4:4)
    

    Note

    The 6 GHz radio is disabled until Automated Frequency Coordination (AFC) regulations are ratified. The access point is for outdoor deployment only at initial release.
  • One IoT Radio (BLE/802.15.4)
• Two Ethernet ports (ETH0 and ETH1):
  • ETH0 is 1 x 100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45 (Power over Ethernet - PoE)
  • ETH1 is 1 x 100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45 (PSE)
• Dimensions: 11.3 in. x 10.0 in. x 2.9 in. (288 mm x 254 mm x 75 mm)
• One dual LED

  For LED activity description, see AP5050U Status LED Activity Description.

• 3 mm diameter safety hanger provision
• Power: PoE 802.3at and 802.3bt: PSE enabled with 4x4x4

  For complete power profile information, refer to the AP5050U power profile.

• Antenna:
  • One omni-directional internal antenna
• Temperature:
  • -40°C to +60°C (-40°F to +140°F) operating temperature
  • -40 °C to +70 °C (-40 °F to +158 °F) storage temperature
• Enclosure: Plastic top enclosure and aluminum bottom

• One micro USB console port for troubleshooting or debugging issues

  You can order a micro USB console adapter for your access point using the part number ACC-WIFI-MICRO-USB.

For more information, see the Universal Wireless AP5050U and AP5050D data sheet.

AP5050U side ports