New in this Guide

The following sections shows the recent documentation revisions for this guide. Use this information to locate the latest updates.

January, 2024 Revisions

Table 1. New and Revised Information
Section	Description
FCC Notice (Part 15 - Class B)	Updated for WiFi 6E in Canada.
Industry Canada Notice	Updated for WiFi 6E in Canada.

October, 2023 Revisions

Table 2. New and Revised Information
Section	Description
Install the Access Point on a Flat Surface Using EIO-04 Brackets	Updated graphic to show drainage holes on side of AP.
Install the Access Point on a Pole Using KT-147407-02 Bracket Parts
Install the Access Point on a Pole Using KT-147407-02 Bracket Parts and KT-150173-01 Extension Arm
Taiwan Regulatory Statement	Taiwan Regulatory updates.
Mexico Regulatory Statement	Mexico Regulatory updates.
Brazil Regulatory Statement	Brazil Regulatory updates.
Thailand Regulatory Statement	Thailand Regulatory updates.
Access Point Bracket Usage and Mounting Optionst	Recommendation that you use 3mm stainless steel washers with EIO-03-SP, and EIO-04.
Install the EIO-04 Under-Seat Slope Bracket and the Access Point
Install the Access Point Under-Seat
Installation Do's and Don'ts	Updated torque specifications for gland caps.
Install the Access Point on a Unistrut Structure Using the MBO-ART03 Bracket
Connect the ETH1 or ETH0 Cable through the Service Panel Base

March, 2023 Revisions

Table 3. New and Revised Information
Section	Description
MBO-ART03 bracket order information	MBO-ART03 order information.
Access Point Bracket Usage and Mounting Options	The ART03 bracket replaces the ART02 bracket. It is an articulating mounting bracket with the following features: Adjustable 7.5", 9", and 10.5" extension with 2-axis +/-80 degree in 10 degree increments
Install the Access Point on a Wall	You can use the KT-147407-02 bracket and MBO-ART03 Articulating Mounting Bracket when you install your access point on an outside wall.
Install the Access Point on a Pole	You can use the KT-147407-02 and MBO-ART03 when you install your access point on an outside pole.
Install the Access Point on a Unistrut Structure Using the MBO-ART03 Bracket	You can use the MBO-ART03 when you install the access point to a unistrut.

9037682-01 Rev AC