AP5050U Purchase Order Information

AP5050U order information

The AP5050U access point is sold by itself, and you must order the mounting brackets and accessories separately for under seat, wall, or pole installations.
Part number Description
AP5050U-WW Outdoor tri-radio WiFi 6E access point (4x4:4), 2.4 GHz, 5GHz, 6GHz, and multirate port, internal omni antennas.

Domain: World SKU

EIO-04 under-seat mounting kit order information

If you need to install the AP5050U access point under a seat, you need to purchase the EIO-04 under-seat enclosure. The ordering details are described in the following table.

Part number Box contents
EIO-04
  • EIO-04 Quick Reference Guide
  • Metal sloping bracket
  • Metal "L" brackets
  • Plastic service panel base
  • Plastic service panel top with one captive screw
  • Conduit covers:
    • Two blank conduit covers for the metal sloping bracket
    • Two blank conduit covers for the service panel base
    • Two ½ in. conduit cover each for the metal sloping bracket and the service panel base
    • Two ¾ in. conduit cover each for the metal sloping bracket and the service panel base
  • A hardware bag containing the following parts:
    • Six 10 mm M6 screws with integral washer
    • Four 75 mm service panel shoulder screws
    • Four anchor posts
    • Four anchor sleeves
    • Four flat washers for anchors
    • Four lock washers for anchors
    • Four stainless steel hex nuts for anchors
    • Anchor assembly instruction sheet

KT-147407-02 bracket order information

You can install the access point to a wall using the KT-147407-02 bracket parts (+/-15 degree, 1-axis) or the MBO-ART03 (10 degree increments +/-80 degrees, variable 7.5 inch, 9 inch, or 10.5 inch extension).

You can install the access point to a pole using:
  • KT-147407-02 bracket parts (+/-15 degree, 1-axis), or
  • MBO-ART03 (10 degree increments +/-80 degree, variable 7.5 inch, 9 inch, or 10.5 inch extension).
Note

Note

The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket.

The WS-MBO-POLE01 bracket is End of Sale (EOS) as of January, 2023.

You can attach the access point to a wall or unistrut bracket using the MBO-ART03 bracket. However, if you are using the MBO-ART03 bracket to attach the access point to a pole, you must use the KT-147407-02 bracket along with the MBO-ART03 bracket.

The ordering details are described in the following tables:

Part number Box contents
KT-147407-02 The KT-147407-02 bracket comes with three bracket parts:
  • Flat part with holes on the metal surface
  • 1-axis tilt part
  • Boxed pole part with step edges
Six hex-head M6 stainless-steel screws
Two hex-head M12 stainless-steel screws
Two hex M12 stainless-steel nuts
One URL card
The KT-147407-02 bracket kit can be used with KT-150173-01 extension arm for wall or pole installations. KT-147407-02 adds +/- 15 degree tilt to wall or pole installations.
Note

Note

You must purchase the KT-150173-01 extension arm separately.

MBO-ART03 bracket order information

The MBO-ART03 bracket is shipped with the following items.
Part number Box contents
MBO-ART03 ART03 mounting bracket with +/- 80-degree (in 10-degree increments) and a variable extension of 7.5 inch, 9 inch, or 10.5 inches.
Four stainless-steel M8 screws
Two M6 long hex head screws and hex nuts with lock washer.
One URL card

KT-150173-01 extension arm order information

The contents of the KT-150173-01 extension arm are described in the following table.
Part number Box contents
KT-150173-01 One KT-150173-01 12 in. extension arm
Two hex-head M12 stainless-steel screws
Two hex M12 stainless-steel nuts
One URL card
Note

Note

You must provide the required M6 hex-head screws and nuts for flat surface installation.
9037682-01 Rev AC