AP5050U Status LED
Activity Description
The access point has one status light on top of the chassis. The status light conveys
operational states for system power, firmware updates, Ethernet and wireless
interface activity, and major alarms.
IQ Engine Status LED Activity
- Dark: Power is Off.
- Solid white: The device power is on and the access point is ready to use.
The device has successfully established a Control And Provisioning of
Wireless Access Points (CAPWAP) connection to ExtremeCloud IQ and is
operating normally.
- Slow-blinking white: The device has a CAPWAP connection to ExtremeCloud IQ,
but is operating on 802.3at power instead of 802.3bt power.
- Solid amber: The device power is on and the access point is in boot up mode,
or is running without a CAPWAP connection.
- Slow-blinking amber: The device has no CAPWAP connection to ExtremeCloud IQ,
and is operating on 802.3at power instead of 802.3bt power.
- Fast-blinking amber: The device is updating its IQ Engine firmware.
ExtremeCloud IQ Controller Status LED Activity
- Dark: The LED power is off or
the LED has been de-activated.
- Solid white: The device is
booting or already taken over by the controller.
- Slow-blinking white: The
device is in the process of being taken over by the controller or has failed
to be taken over by the controller.
- Flashing fading white:
Configuration pushes down to access point from controller helping an user to
locate the access point location using visual inspection.
- Solid amber: The access point
is upgrading its firmware.
- Fast-blinking amber: The
access point is acquiring DHCP IP.
