Purchase Order Information

Learn how to purchase various brackets and accessories for installing the AP560h access point.

AP560h purchase order information

The AP560h access point is sold by itself and cannot be installed without a mounting bracket or an accessory.


Part number	Description
AP560h-FCC	Cloud-ready, Dual 5GHz, Dual-band, Sensor radio, Dual Radio 802.11ax/ac/abgn, 4x4:4 MIMO Outdoor 11ax access point. Internal 30deg/70deg Panel Antenna. Domain: US and Columbia

You can install the access point to a wall using the KT-147407-02 bracket parts (+/-15 degree, 1-axis) or the MBO-ART02 (20 degree increments +/-80 degrees, 10 inch extension).


Part number	Box contents
KT-147407-02	The KT-147407-02 bracket comes with three bracket parts: Flat part with holes on the metal surface 1-axis tilt part Boxed pole part with step edges
	Six hex-head M6 stainless-steel screws
	Two hex-head M12 stainless-steel screws
	Two hex-head M12 stainless-steel nuts
	One URL card

The KT-147407-02 bracket kit can be used with KT-150173-01 extension arm for wall or pole installations.

Note

You must purchase the KT-150173-01 extension arm separately.

The contents of the KT-150173-01 extension arm are described in the following table.


Part number	Box contents
KT-150173-01	One KT-150173-01 12 in. extension arm
	Two hex-head M12 stainless-steel screws
	Two hex-head M12 stainless-steel nuts
	One URL card

Note

You must provide the required M6 hex-head screws and nuts for flat surface installation.


Part number	Box contents
MBO-ART02 The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket.	ART02 10 in. 2-axis articulating mounting bracket
	Four concrete anchors with washers and nuts
	Two stainless-steel M6 screws
	One hex-head screw
	One URL card


Part number	Box contents
WS-MBO-POLE01 The WS-MBO-POLE01 bracket is End of Sale (EOS) as of January, 2023.	One WS-MBO-POLE01 bracket
	Four M3 screws with nuts and washers
	One URL card