Details about various mounting brackets and accessories that can be used with the access point during wall or pole installation.
| Mounting bracket/accessory and part number | Wall install | Pole install | Notes |
|---|---|---|---|
| KT-147407-02 bracket; comes with three bracket parts | Yes | Yes | For attaching to a wall or a flat surface, use the bracket part that has two holes metal surface. For attaching to a pole, attach the KT-147407-02 pole part on top of the 1-axis tilt part. |
| KT-150173-01; extension arm; used with KT-147407-02 bracket parts | Yes; place the KT-150173-01 extension arm on top of the 1-axis KT-147407-02 tilt part | Yes; attach the KT-147407-02 pole part to the extension arm | None. |
| WS-MBO-POLE01 (#30520); bracket; also known as the pole mounting bracket | No | Yes | If the pole diameter is <= 1.0 in. (25.4 mm), use small cable clamp. If the pole diameter is between 5.0 in. (127.0 mm) – 7.0 in. (178.0 mm), use large cable clamp. For any other pole diameter, provide your own stainless steel cable clamp. The band must be 0.5 in. (12.7mm) wide. The POLE01 bracket can be used only when paired with the MBO-ART02 bracket. |
| MBO-ART02; 10 in. 2-axis articulating mounting bracket | Yes | Yes | The articulating mounting bracket is used with POLE01 bracket for pole install. The wall must be strong enough to support the access point during inclement weather. |
Note
The access point cannot be installed without the mounting bracket.