AP560h Features

The AP560h access point has the following features:
Click to expand in new window
AP560h front view
Front view of the AP560h access point. The Extreme Networks 'E' logo is printed on the front face of the access point and the logo is enclosed by the LED indicators.
Click to expand in new window
AP560h access point side ports
Side ports on the AP560h access point.
Callout Description
A GE1 port
B GE2 port
C Console port
Note

Note

The console port cap must be tightened to a torque of 5 in-lbs.
If a torque wrench is not available, a flat-bladed screwdrive can be used. The flat blade must be 7/16 in. wide to avoid noticeable cap slot deformation.
Note

Note

The slot deformation will not affect the IP67 console port cap properties.

Turn the console port cap until there is resistance from the access point gasket, and then turn the console port cap to a minimum of ½ turn further.

9036166-04 Rev AB