Install the Access Point Using KT-150173-01 Extension Arm

Before you begin

Hardware required to install the access point on a wall using the KT-150173-01 extension arm:
  • KT-150173-01 extension arm
  • Four M6 screws
  • Four M6 hex-head screws
  • One access point

Procedure

  1. Using the KT-150173-01 extension arm as a template, mark and drill four hole centers on a flat surface.
    The holes must be within the circular cuts in the end of the flange.
  2. Attach one end of the KT-150173-01 extension arm to the access point using four M6 screws.
  3. Attach the other end of the KT-150173-01 extension arm to the wall using four M6 hex-head screws.

    Use screw-in anchors with the four M6 hex-head screws when you mount the bracket on a wood surface and use concrete anchors for concrete surface.

9036166-04 Rev AB