ip mroute resource-usage (for a VRF)

Syntax

• default ip mroute resource-usage egress-threshold <0-32767>

• default ip mroute resource-usage egress-threshold <0-32767> ingress-threshold

• default ip mroute resource-usage ingress-threshold <0-32767>

• default ip mroute resource-usage log-msg

• default ip mroute resource-usage trap-msg

• ip mroute resource-usage egress-threshold <0-32767>

• ip mroute resource-usage egress-threshold <0-32767> ingress-threshold <0-32767>

• ip mroute resource-usage ingress-threshold <0-32767>

• ip mroute resource-usage log-msg

• ip mroute resource-usage trap-msg

• no ip mroute resource-usage egress-threshold <0-32767>

• no ip mroute resource-usage egress-threshold <0-32767> ingress-threshold

• no ip mroute resource-usage ingress-threshold <0-32767>

• no ip mroute resource-usage log-msg

• no ip mroute resource-usage trap-msg

Command Parameters

egress-threshold <0-32767>

Configures the egress record threshold (S,G). A notification message is sent if this value is exceeded. The default is 0.

ingress-threshold <0-32767>

Configures the ingress record threshold (peps). A notification message is sent if this value is exceeded. The default is 0.

log-msg

Configures the notification method for sending only a log message after the threshold level is exceeded. The default is disabled.

log-msg

Configures the notification method for sending only a log message after the threshold level is exceeded. The default is disabled.

trap-msg

Configures the notification method for sending only a trap message after the threshold level is exceeded. The default is disabled.

trap-msg

Configures the notification method for sending only a trap message after the threshold level is exceeded. The default is disabled

Default

None

Command Mode

VRF Router Configuration