ipv6 fhs ipv6-access-list

Create an FHS IP access list or add IP prefixes to an existing IP access list.

Syntax

default ipv6 fhs ipv6–access-list [WORD<1-64>] [WORD<0-46>] [ge|le|mode]
ipv6 fhs ipv6–access-list [WORD<1-64>] [WORD<0-46>] [ge<0-128>] [le<0-128>] [mode <allow | deny>]
no ipv6 fhs ipv6–access-list [WORD<1-64>] [WORD<0-46>]

ge <0-128>: Specifies the minimum IPv6 mask length. By default, the value is equal to the configured prefix length.
le <0-128>: Specifies the maximum IPv6 mask length. By default, the value is equal to the configured prefix length.
mode <allow | deny>: Specifies the access mode. By default, the value is allow.
WORD<0-46>: Specifies the IPv6 address or the prefix length to be added to the IP access list.
WORD<1-64>: Specifies the IP access list name.

None

Global Configuration