show rmon log

View Remote Network Monitoring (RMON) log entries.

Syntax

show rmon log

Command Parameters

log: Displays RMON logs on the switch.

Default

None

Command Mode

User EXEC

Command Output

The show rmon log command displays the following information:


Output field	Description
INDEX	Specifies an index that uniquely identifies an entry in the log table generated by the same event entries.
EVENT INDEX	Specifies an index that uniquely identifies an entry in the event table. Each entry defines one event that is generated under appropriate conditions.
TIME	Specifies the creation time for this log entry.
DESCRIPTION	Specifies an implementation dependent description of the event that activated this log entry.

Example

The following example displays the RMON log information.

Switch:1(config)#show rmon log
======================================================================================== 
                               Rmon Log
========================================================================================
INDEX  EVENT INDEX        TIME                     DESCRIPTION
----------------------------------------------------------------------------------------
1      60535     8 day(s), 19:14:45    1.3.6.1.4.1.2272.1.19.14.0 (absValue = 0, Falling 
                                       Threshold = 2, interval = 10)[alarmIndex.1][trap]
                                            "Falling Event"
2      60535     8 day(s), 19:14:45    1.3.6.1.4.1.2272.1.19.14.0 (absValue = 0, Falling
                                       Threshold = 1, interval = 10)[alarmIndex.2][trap]
                                          "Falling Event"