show isis multi-area ipv6 redistribute remote-to-home

Displays the IS-IS Multi-area SPB IPv6 remote to home redistribution configuration on the switch.

Syntax

show isis multi-area ipv6 redistribute remote-to-home
show isis multi-area ipv6 redistribute remote-to-home vrf WORD<1-16>
show isis multi-area ipv6 redistribute remote-to-home vrfids WORD<0-512>

Command Parameters

vrf WORD<1-16>: Specifies the Virtual Router Forwarding (VRF) name.
vrfids WORD<0-512>: Specifies a range of VRF IDs as text from range 0 to 512 characters in length.

Default

The default is none.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.

Command Output

The show isis multi-area ipv6 redistribute remote-to-home command displays the following information:


Parameter	Description
DIRECTION	Indicates the direction of the redistribution policy.
ENABLE	Indicates if the redistribution policy is enabled on the switch.
RPOLICY	Indicates the route policy for IS-IS Multi-area SPB IPv6 redistribution.

Example

Displaying the IS-IS Multi-area SPB IPv6 remote to home redistribution on the switch:

Switch:1>show isis multi-area ipv6 redistribute remote-to-home
===================================================================================
         ISIS Multiarea Redistribute List for ipv6 unicast - GlobalRouter
===================================================================================
DIRECTION            ENABLE     RPOLICY
-----------------------------------------------------------------------------------
remote-to-home       TRUE
–----------------------------------------------------------------------------------