Creating MPs and the CCM Transmission Interval
Within an MA, you configure the following MPs:
- Maintenance end points (MEPs), which are one of the following types:
- UP MEPs—transmit CCMs, and maintain CCM database.
- DOWN MEPs—transmit CCMs, and maintain CCM database.
- Maintenance intermediate points (MIPs)—pass CCMs through.
Each MEP must have an ID that is unique for that MEP throughout the
MA.
- To configure UP and DOWN MEPs and its unique MEP ID, use
the following command:
configure cfm
domain domain_name
association
association_name
ports
port_list add [ end-point [ up | down ]
mepid group { group_name } ] | [ intermediate-point
]]
- To change the MEP ID on an existing MEP, use the following
command:
configure cfm domain domain_name
association
association_name
ports
port_list
end-point [ up | down ] mepid {
mepid }
- To delete UP and DOWN MEPs, use the following
command:
configure cfm
domain domain_name
association
association_name
ports
port_list delete [[ end-point [ up | down ]]
| intermediate-point ]
- To configure a MIP, use the following command:
configure cfm domain domain_name
association
association_name
ports
port_list add [ end-point [ up | down ]
mepid group { group_name }] | [ intermediate-point ]
- To delete a MIP, use the following command:
configure cfm
domain domain_name
association
association_name
ports
port_list delete [[ end-point [ up | down ]]
| intermediate-point ]
- To configure the transmission interval for the MEP to send
CCMs, use the following command:
configure cfm
domain domain_name
association
association_name
ports
port_list
end-point [ up | down ] transmit-interval [
3| 10 | 100 | 1000 | 10000 |
60000 | 600000 ]
- To unconfigure the transmission interval for the MEP to
send CCMs and return it to the default, use the following command:
unconfigure cfm domain domain_name
association
association_name
ports
port_list
end-point [ up | down ]
transmit-interval
- To enable or disable a MEP, use the following
command:
configure cfm domain domain_name
association
association_name
ports
port_list
end-point [ up | down ] [enable |
disable ]
Print
this page
Email this topic
Feedback
View PDF
Download EPUB