Managing the Local VPP Database

Only one dynamic ACL or policy can be added to a VPP. Ingress LVPPs apply to traffic flowing from the VM, into the switch port, and then to the client. Egress LVPPs apply to traffic flowing from the client, out the switch port, and to the VM.

For instructions on creating policy files, see Policy Manager. For instructions on creating dynamic ACLs, see ACLs.

To create and configure entries in the LVPP database, use the following commands:
create vm-tracking vpp vpp_name

configure vm-tracking vpp vpp_name add [ingress | egress] [policy policy_name | dynamic-rule rule_name] {policy-order policy_order}
To delete or unconfigure entries in the local VPP database, use the following commands:
delete vm-tracking vpp {vpp_name}

unconfigure vm-tracking vpp vpp_name
To display the policy file or ACL associated with one or more VPPs , use the following command:
show vm-tracking vpp {vpp_name}

Published March 1, 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback